Equipment selection
- Selection method:
- Air flow:
- Pressure:
Operating point
- Air flow: --
- Pressure: ---
Print version
Search results
Mode | Current | Voltage | Power consumption | Current | Maximum air capacity | RPM | Sound pressure level at 3 m distance | Maximum transported air temperature | Protection rating | Weight | RPM | Maximum air flow capacity at cross directed | Maximal air flow capacity at straight directed | Spigot size | Phase | High-powered motor | Number of flanges | Number of poles | Frequency | Power | Air capacity | Voltage | Maximum air capacity | RPM | Weight | Phase | Pressure | Frequency | Fan power | Sound pressure level at 3 m | Current | Engine Type | Frequency | Protection rating | SEC Class | Power | SEC Class | Motor protection rating | Duct diameter | EC motor | Width | Height | Casing material | Outdoor mounting | Sound-insulated casing | Duct | Design | Type | Mounting | Smoke removal | Maximum air capacity | Maximum air capacity | Current | Max. transported air temperature | Current | Sound pressure level at 3 m distance | Low-powered motor | Highpowered motor | SEC class* | Backdraft damper | Sound- and heat-insulated casing | Low-powered motor | Double-speed motor | Low noise and low-powered motor | PM 2.5 filtration efficiency | Transported air temperature | Air capacity | Turbine protection rating | * | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
50 Hz | 0.34 | - | - | - | - | - | 40 | - | IP X4 | - | - | - | - | - | - | - | - | - | - | 80 | - | 230 | 250 | 2820 | 2.01 | 1 | - | 50 | - | - | - | - | - | - | - | - | C | - | 100 | no | 270 | 250 | plastic | no | no | for round air ducts | centrifugal | exhaust , supply | Inline | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). |
60 Hz | 0.34 | - | - | - | - | - | 41 | - | IP X4 | - | - | - | - | - | - | - | - | - | - | 81 | - | 230 | 290 | 2890 | 2.01 | 1 | - | 60 | - | - | - | - | - | - | - | - | - | - | 100 | no | 270 | 250 | plastic | no | no | for round air ducts | centrifugal | exhaust , supply | Inline | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). |
- | - | 230 | 710 | - | - | 1230 | 47 | - | IP X4 | 52.5 | - | - | - | - | 1 | - | - | 4 | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 500 | 300 | galvanized steel | - | - | for rectangular air ducts | centrifugal | - | Inline | - | - | - | 3.10 | - | - | - | - | - | - | - | yes | - | - | - | - | - | -25 ... +70 | 2350 | - | - |
- | - | 400 | 2380 | - | - | 1365 | 56 | - | IP X4 | 99 | - | 11340 | 10490 | - | 3 | - | - | 4 | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 560 | - | - | - | aluzinc | - | - | for square air ducts , for round air ducts | centrifugal | supply and exhaust | Inline | - | - | - | 5.00 | -40 +60 | - | - | - | no | - | - | yes | - | - | - | - | - | - | - | - | - |
- | - | 230 | 296 | - | - | 2720 | 54 | - | IP X4 | 7.8 | - | - | - | - | 1 | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 315 | - | - | - | polymer coated steel | yes | - | for round air ducts | centrifugal | exhaust , supply | outdoor mounting , wall mounting , Inline | - | 1880 | - | 1.34 | -25 +45 | - | - | no | yes | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | 230 | 101 | 799 | 1400 | 45 | 50 | IP X4 | 6.8 | - | - | - | 250 | - | - | - | - | 60 | - | - | - | - | - | - | - | 80 | - | - | - | - | 220V / 60Hz | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
- | - | 380-480 | - | - | - | 1540 | 69 | - | - | 63 | - | - | - | - | 3 | - | - | - | 50/60 | - | - | - | - | - | - | - | - | - | - | - | 3.83 | - | - | IPX4 | - | 2412 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25 ... +60 | 13640 | IP54 | - |
- | - | 230 | 154 | - | 950 | - | 42 | - | IP X4 | 12.85 | 2375 | - | - | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | B | - | - | - | 200 | - | - | - | polymer coated steel | - | - | for round air ducts | centrifugal | supply and exhaust | Inline | - | - | - | 0.67 | -25 +50 | - | - | no | no | - | - | yes | - | - | - | - | - | - | - | - | - |
- | - | 400 | 274 | - | - | 930 | 38 | - | IP X4 | 40.5 | - | - | - | - | 3 | - | - | 6 | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 500 | 250 | galvanized steel | - | - | for rectangular air ducts | centrifugal | - | Inline | - | - | - | 0.67 | - | - | - | - | - | - | - | yes | - | - | - | - | - | -20 … +60 | 1490 | - | - |
- | - | 1~230 | 165 | - | 1250 | 2600 | 48 | - | IP X4 | 4.3 | - | - | - | - | - | - | - | - | 50/60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 250 | yes | - | - | plastic | - | - | for round air ducts | centrifugal | - | Inline | - | - | - | 1.10 | -25 +60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). |
50 Hz | - | 230 | 68 | - | 350 | 1300 | 25 | - | IP X4 | 16.5 | - | - | - | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | C | - | - | - | 150 | - | - | - | polymer coated steel | - | yes | for round air ducts | - | supply | wall mounting , ceiling mounting | - | - | - | 0.3 | - | - | - | - | - | - | - | - | - | no | yes | 97 | - | - | - | - | - |
60 Hz | - | 230 | 78 | - | 390 | 1475 | 26 | - | IP X4 | 16.5 | - | - | - | - | - | - | - | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | C | - | - | - | 150 | - | - | - | polymer coated steel | - | yes | for round air ducts | - | supply | wall mounting , ceiling mounting | - | - | - | 0.34 | - | - | - | - | - | - | - | - | - | no | yes | 97 | - | - | - | - | - |
- | - | 230 | - | - | 300 | 3680 | 37 | - | IP X4 | 4.9 | - | - | - | - | 1 | - | - | - | 50/60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | B | 30 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25...+55 | 0.29 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). |
- | - | 400 | 700 | - | 12000 | 710 | 61 | - | IP X4 | 30 | - | - | - | - | 3 | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | 0.55 | - | - | - | - | - | 37 | - | IP X4 | - | - | - | - | - | - | - | - | - | - | 69 | 341 | 200-277 | - | 3270 | 12 | 1 | - | 50/60 | - | - | - | - | - | - | - | - | B | - | 100 | yes | - | - | aluzinc | no | yes | for round air ducts | centrifugal | supply and exhaust | Inline | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25 ... +55 | - | - | - |
- | - | 400 | 3429 | - | 11190 | - | - | - | IP X4 | 72.0 | 1800 | - | - | - | 3 | - | - | - | 50/60 | - | - | - | - | - | - | - | - | - | - | - | 5.00 | - | - | - | - | - | - | - | - | yes | - | - | galvanized steel | - | - | for rectangular air ducts | centrifugal | supply and exhaust | Inline | - | - | - | - | -25 +50 | - | 66 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | 1.45 | - | - | - | - | - | - | - | IP 44 | - | - | - | - | - | - | - | - | - | - | 259 | 1264 | - | - | 1600 | 26 | - | - | - | - | - | - | - | - | - | - | - | - | - | 200 | no | - | - | aluzinc | no | yes | for round air ducts | centrifugal | supply and exhaust | Inline | - | - | - | - | - | - | 40 | - | - | - | - | - | - | - | - | - | - | -25 ... +50 | - | - | - |
Min speed | - | 1~230 | - | - | 752 | 1866 | 37 | - | IP X4 | - | - | - | - | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | 0.37 | - | - | - | - | 82 | - | IP 20 | 200 | - | - | - | polymer | - | - | for round air ducts | mixed-flow | - | Inline | - | - | 209 | - | -25...+55 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Mid speed | - | 1~230 | - | - | 978 | 2400 | 40 | - | IP X4 | - | - | - | - | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | 0.45 | - | - | - | - | 101 | - | IP 20 | 200 | - | - | - | polymer | - | - | for round air ducts | mixed-flow | - | Inline | - | - | 272 | - | -25...+55 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Max speed | - | 1~230 | - | - | 1140 | 2738 | 42 | - | IP X4 | - | - | - | - | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | 0.51 | - | - | - | - | 113 | - | IP 20 | 200 | - | - | - | polymer | - | - | for round air ducts | mixed-flow | - | Inline | - | - | 317 | - | -25...+55 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | 8.7 | 400 | - | - | 21860 | - | 62 | - | IP X4 | 275 | 965 | - | - | - | 3 | - | - | 6 | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 4000 | - | IP55 | 800 | - | - | - | aluzinc | - | - | for round air ducts | centrifugal | exhaust | flush mounting | - | - | 6072 | - | - | - | - | - | - | - | - | yes | - | - | - | - | - | -25...+120 | - | - | - |
- | - | 230 | 39 | - | 408 | - | 52 | 40 | IP 24 | 3 | - | - | - | 200 | - | - | - | - | 60 | - | - | - | - | - | - | - | 50 | - | - | - | - | 220V / 60Hz | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | 230 | 1066 | - | 1455 | 47 | -20 +50 | IP X4 | 38 | - | - | - | - | 1 | 1 | 4 | 4 | 50 | - | - | - | - | - | - | - | - | - | - | - | - | 220В / 50Гц | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
- | - | 400 | - | - | 3430 | - | - | - | IP X4 | - | 1490 | - | - | - | 3 | - | - | 4 | - | - | - | - | - | - | 35 | - | - | - | 585 | 49 | - | - | 50/60 | - | - | - | - | - | 355 | - | - | - | polymer coated steel | - | - | for round air ducts | - | supply and exhaust | floor mounting , wall mounting , ceiling mounting , Inline | - | - | - | 1.77 | 60 | - | - | - | - | - | - | yes | - | - | - | - | - | - | - | - | - |
- | - | 230 , 380-480 | - | - | - | - | 60 | IP X4 | 6.3 | - | - | - | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | 220В / 50Гц | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
50 Hz | - | 230 | 540 | - | 10900 | 850 | 59 | - | IP 24 | 20.0 | - | - | - | - | 1 | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2.4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
60 Hz | - | 230 | 610 | - | 10990 | 1075 | 59 | - | IP 24 | 20.0 | - | - | - | - | 1 | - | - | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2.74 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | 230 | 202 | - | 2235 | 1330 | 48 | - | IP X4 | 58 | - | - | - | - | 1 | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 355 | - | - | - | aluzinc | - | - | for round air ducts | centrifugal | supply and exhaust | Inline | - | - | - | 0.89 | -25...+55 | - | - | - | no | - | - | yes | no | - | - | - | - | - | - | - | - |
50 Hz | - | 400 | 230 | - | 4900 | 920 | 57 | - | IP 24 | 14.0 | - | - | - | - | 3 | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.58 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
60 Hz | - | 400 | 281 | - | 5430 | 1015 | 57 | - | IP 24 | 14.0 | - | - | - | - | 3 | - | - | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.59 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
50 Hz | - | 230 | 75 | - | 450 | 2475 | 54 | - | IP X4 | 3.82 | - | - | - | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | B | - | - | - | 125 | - | - | - | polymer coated steel | yes | - | for round air ducts | centrifugal , protecting screen | exhaust | outdoor mounting , wall mounting | - | - | - | 0.33 | 55 | - | - | - | - | - | yes | - | - | - | - | - | - | - | - | - | - |
60 Hz | - | 230 | 98 | - | 465 | 2570 | 54 | - | IP X4 | 3.82 | - | - | - | - | - | - | - | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | B | - | - | - | 125 | - | - | - | polymer coated steel | yes | - | for round air ducts | centrifugal , protecting screen | exhaust | outdoor mounting , wall mounting | - | - | - | 0.43 | 55 | - | - | - | - | - | yes | - | - | - | - | - | - | - | - | - | - |
TO COMPLETE THE REGISTRATION CLICK ON THE LINK SENT YOU BY EMAIL
x
Your registration has been successfully completed. Enter your details in the login form in the Personal Area.
x
Your message
was successfully sent x
was successfully sent x
Check your inbox for further instructions
x
Share your opinion
Questionnaire
Where have you learned about us?