Equipment selection
- Selection method:
- Air flow:
- Pressure:
Operating point
- Air flow: --
- Pressure: ---
Print version
Search results
Mode | Power | Current | Voltage | Power consumption | Current | Maximum air capacity | RPM | Sound pressure level at 3 m distance | Maximum transported air temperature | Protection rating | Weight | Fan current | Max. air capacity | RPM | Noise level at 3 m | Phase | Number of poles | Impeller diameter | Impeller width | Frequency | Speed | Power | RPM | IP Code | Voltage | Maximum air capacity | RPM | Weight | Phase | Frequency | Current | Maximum transported air temperature | Power consumption | Engine Type | Current | Frequency | Protection rating | SEC Class | Power | SEC Class | Motor protection rating | Duct diameter | EC motor | Width | Height | Casing material | Outdoor mounting | Sound-insulated casing | Duct | Design | Type | Mounting | Smoke removal | Maximum air capacity | Current | Max. transported air temperature | Current | Transported air temperature | Sound pressure level at 3 m distance | Low-powered motor | Highpowered motor | PM 2.5 filtration efficiency | SEC class* | Sound- and heat-insulated casing | Low-powered motor | Transported air temperature | Air capacity | Turbine protection rating | * | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | - | - | - | - | - | - | - | 55 | - | IP X4 | - | 0.53 | - | - | - | - | - | - | - | - | - | 89 | - | - | 230 | 313 | 3460 | 3.6 | 1 | 50 | - | - | - | - | - | - | - | - | - | B | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | 230 | 361 | - | 2815 | - | - | - | IP X4 | 25.2 | - | - | 2000 | - | 1 | - | - | - | 50/60 | - | - | - | - | - | - | - | - | - | - | 2.62 | - | - | - | - | - | - | - | - | - | - | - | yes | - | - | galvanized steel | - | - | for rectangular air ducts | centrifugal | supply and exhaust | Inline | - | - | - | -25 +50 | - | - | 49 | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | 230 | - | - | - | 2400 | - | - | - | 8 | - | - | - | - | 1 | - | - | - | 50/60 | - | - | - | - | - | - | - | - | - | - | 0.80 | - | - | - | - | - | IPX4 | - | 101 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 47 | - | - | - | - | - | - | - | -25 ... +60 | 1290 | IP55 | - |
Min speed | - | - | 1~230 | - | - | 2090 | - | 38 | - | IP X4 | - | - | - | - | - | - | - | - | - | 50 | - | - | 1350 | - | - | - | - | - | - | - | 0.60 | - | - | - | - | - | - | - | 126 | - | IP 20 | 355 | - | - | - | polymer | - | - | for round air ducts | mixed-flow | - | Inline | - | 581 | - | -25...+55 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Mid speed | - | - | 1~230 | - | - | 2296 | - | 38 | - | IP X4 | - | - | - | - | - | - | - | - | - | 50 | - | - | 1400 | - | - | - | - | - | - | - | 0.58 | - | - | - | - | - | - | - | 131 | - | IP 20 | 355 | - | - | - | polymer | - | - | for round air ducts | mixed-flow | - | Inline | - | 638 | - | -25...+55 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Max speed | - | - | 1~230 | - | - | 2485 | - | 43 | - | IP X4 | - | - | - | - | - | - | - | - | - | 50 | - | - | 1470 | - | - | - | - | - | - | - | 0.66 | - | - | - | - | - | - | - | 150 | - | IP 20 | 355 | - | - | - | polymer | - | - | for round air ducts | mixed-flow | - | Inline | - | 690 | - | -25...+55 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | 200-277 | - | 1.34 | - | - | 48 | - | - | 14 | - | - | 2610 | - | 1 | - | - | - | 50/60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | IPX4 | - | 182 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -20 … +60 | 2330 | IP44 | - |
- | - | - | 230 | 75 | - | 470 | - | 40 | - | IP X4 | 10.5 | - | - | 2515 | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | B | - | - | - | 150 | - | - | - | polymer coated steel | - | - | for round air ducts | centrifugal | supply and exhaust | Inline | - | - | 0.33 | -25...+55 | - | - | - | yes | no | - | - | yes | - | - | - | - | - | - |
- | - | - | 400 | 743 | - | - | 940 | 55 | - | IP X4 | 49.5 | - | - | - | - | 3 | 6 | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 600 | 350 | galvanized steel | - | - | for rectangular air ducts | centrifugal | - | Inline | - | - | 1.47 | - | - | - | - | - | - | - | - | no | - | - | -20 … +70 | 3310 | - | - |
50 Hz | - | - | 1~ 220-240 | 185 | - | 1540 | 2730 | 53 | - | IP X4 | 6.5 | - | - | - | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | IP44 | 315 | - | - | - | galvanized steel | yes | - | for round air ducts | centrifugal | - | outdoor mounting , wall mounting , Inline | - | - | 0.81 | -25 +45 | - | - | - | no | - | - | - | - | - | - | - | - | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). |
60 Hz | - | - | 1~ 220-240 | 238 | - | 1580 | 2870 | 54 | - | IP X4 | 6.5 | - | - | - | - | - | - | - | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | IP44 | 315 | - | - | - | galvanized steel | yes | - | for round air ducts | centrifugal | - | outdoor mounting , wall mounting , Inline | - | - | 1.04 | -25 +45 | - | - | - | no | - | - | - | - | - | - | - | - | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). |
- | - | - | 230 | 115 | - | 850 | - | 29.1 | - | IP X4 | 8.25 | - | - | 1300 | - | 1 | 4 | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | B | - | - | - | 200 | - | - | - | aluzinc | - | - | for round air ducts | centrifugal | supply and exhaust | Inline | - | - | 0.45 | -25 +40 | - | - | - | - | - | - | - | yes | - | - | - | - | - | - |
50 Hz | - | - | 220-240 | 194 | - | 1420 | 2790 | 50 | - | IP X4 | 8.4 | - | - | - | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | 1 | - | - | - | - | - | - | - | - | - | - | - | - | 250 | - | - | - | polymer coated steel | - | - | for round air ducts | centrifugal | supply and exhaust | Inline | - | - | 0.85 | -25 +45 | - | - | - | - | - | - | - | - | - | - | - | - | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). |
60 Hz | - | - | 220-240 | 240 | - | 1520 | 2860 | 51 | - | IP X4 | 8.4 | - | - | - | - | - | - | - | - | 60 | - | - | - | - | - | - | - | - | 1 | - | - | - | - | - | - | - | - | - | - | - | - | 250 | - | - | - | polymer coated steel | - | - | for round air ducts | centrifugal | supply and exhaust | Inline | - | - | 1.05 | -25 +45 | - | - | - | - | - | - | - | - | - | - | - | - | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). |
- | 110 | - | - | - | - | - | - | - | - | - | - | 0.87 | - | 3538 | 52 | - | - | - | - | - | - | - | - | IP X4 | 230 | - | - | 6 | 1 | 50/60 | - | - | - | - | - | - | - | - | - | - | - | - | yes | - | - | polymer coated steel | yes | no | - | centrifugal | exhaust | for roof | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25 ... +60 | 770 | IP55 | - |
- | - | 3.4 | 400 | - | - | 9100 | - | 60 | - | IP X4 | 101.8 | - | - | 1450 | - | 3 | 4 | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1500 | - | IP55 | 500 | - | - | - | aluzinc | - | - | for round air ducts | centrifugal | exhaust | flush mounting | - | 2528 | - | - | - | - | - | - | - | - | - | yes | - | - | -25...+120 | - | - | - |
50 Hz | - | - | 230 | 470 | - | - | 1370 | 47 | - | IP X4 | 56.2 | - | - | - | - | 1 | 4 | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 600 | 350 | galvanized steel | - | - | for rectangular air ducts | centrifugal | exhaust , supply | Inline | - | - | 2.37 | - | - | - | - | - | - | - | - | yes | - | - | -40 … +80 | 2950 | - | - |
60 Hz | - | - | 230 | 700 | - | - | 1460 | 47 | - | IP X4 | 56.2 | - | - | - | - | 1 | 4 | - | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 600 | 350 | galvanized steel | - | - | for rectangular air ducts | centrifugal | exhaust , supply | Inline | - | - | 3.15 | - | - | - | - | - | - | - | - | yes | - | - | -40 … +55 | 3515 | - | - |
50 Hz | - | - | 230 | 140 | - | 2500 | 1380 | - | - | IP 24 | 7.8 | - | - | - | - | 1 | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.65 | - | 46 | - | - | - | - | - | - | - | - | - | - | - |
60 Hz | - | - | 230 | 147 | - | 2650 | 1700 | - | - | IP 24 | 7.8 | - | - | - | - | 1 | - | - | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.66 | - | 47 | - | - | - | - | - | - | - | - | - | - | - |
50 Hz | - | - | 230 | 250 | - | 4680 | 1350 | 56 | - | IP X4 | 9.1 | - | - | - | - | 1 | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.2 | - | - | - | - | - | - | - | - | - | - | - | - | - |
60 Hz | - | - | 230 | 325 | - | 4790 | 1600 | 57 | - | IP X4 | 9.1 | - | - | - | - | 1 | - | - | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.46 | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | 400 | 1560 | - | - | 1310 | 57 | - | IP X4 | 35 | - | - | - | - | 3 | 4 | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 600 | 300 | galvanized steel | - | - | for rectangular air ducts | centrifugal | - | Inline | - | - | 2.73 | - | - | - | - | - | - | - | - | no | - | - | -25 … +65 | 3740 | - | - |
- | - | - | 400 | 3870 | - | - | 930 | 55 | - | IP X4 | 150 | - | - | - | - | 3 | 6 | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1000 | 500 | galvanized steel | - | - | for rectangular air ducts | centrifugal | - | Inline | - | - | 7.0 | - | - | - | - | - | - | - | - | yes | - | - | -20 … +55 | 9540 | - | - |
- | - | - | 400 | - | - | - | 940 | 71 | IP 54 | 49 | - | - | - | - | - | 6 | 180 , 355 | 143 | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | 380В / 50Гц | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
50 Hz | - | - | 230 | 550 | - | 8800 | 1300 | 62 | - | IP 24 | 16.5 | - | - | - | - | 1 | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2.55 | - | - | - | - | - | - | - | - | - | - | - | - | - |
60 Hz | - | - | 230 | 654 | - | 8970 | 1580 | 63 | - | IP 24 | 16.5 | - | - | - | - | 1 | - | - | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2.88 | - | - | - | - | - | - | - | - | - | - | - | - | - |
50 Hz | - | - | 230 | 110 | - | 1700 | 1300 | 42 | - | IP X4 | 1.8 | - | - | - | - | 1 | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.75 | 40 | - | - | - | - | - | - | - | - | - | - | - | - |
60 Hz | - | - | 230 | 104 | - | 1650 | 1365 | 41 | - | IP X4 | 1.8 | - | - | - | - | 1 | - | - | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.7 | 40 | - | - | - | - | - | - | - | - | - | - | - | - |
50 Hz | - | - | - | - | - | - | - | - | - | - | - | - | 1700 | 1300 | 54 | - | - | - | - | - | - | - | - | IP 24 | 230 | - | - | 11.5 | 1 | - | - | 40 | 110 | - | 0.75 | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
60 Hz | - | - | - | - | - | - | - | - | - | - | - | - | 1650 | 1365 | 54 | - | - | - | - | - | - | - | - | IP 24 | 230 | - | - | 11.5 | 1 | - | - | 40 | 104 | - | 0.7 | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | 200-277 | - | - | 4000 | - | 52 | - | IP X4 | - | - | - | 1700 | - | 1 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 50/60 | - | - | 460 | - | - | 355 | yes | - | - | polymer coated steel | - | - | for round air ducts | mixed-flow | supply and exhaust | Inline | - | - | 2.5 | -25 +40 | - | - | - | - | - | - | - | yes | - | - | - | - | - | - |
- | - | - | 230 | 58 | - | 285 | 2530 | 34 | - | IP X4 | 13 | - | - | - | - | 1 | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | C | - | - | - | 100 | - | - | - | aluzinc | - | - | for round air ducts | centrifugal | supply and exhaust | Inline | - | - | 0.25 | -25...+55 | - | - | - | - | no | - | - | yes | no | - | - | - | - | - |
min | - | - | 230 | - | - | 390 | 700 | 22 | - | IP X4 | 18.78 | - | - | - | - | 1 | - | - | - | 50 | min | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | C | 106 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.47 | - | - | - | - | 37 | - | - | - | - | - | - | - | - |
max | - | - | 230 | - | - | 630 | 1200 | 38 | - | IP X4 | 18.78 | - | - | - | - | 1 | - | - | - | 50 | max | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | C | 123 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.59 | - | - | - | - | 28 | - | - | - | - | - | - | - | - |
50 Hz | - | - | 230 | 151 | - | 3200 | 945 | 52 | - | IP X4 | 9.1 | - | - | - | - | 1 | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.78 | - | - | - | - | - | - | - | - | - | - | - | - | - |
60 Hz | - | - | 230 | 161 | - | 1115 | 52 | 3250 | - | IP X4 | 9.1 | - | - | - | - | 1 | - | - | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.8 | - | - | - | - | - | - | - | - | - | - | - | - | - |
TO COMPLETE THE REGISTRATION CLICK ON THE LINK SENT YOU BY EMAIL
x
Your registration has been successfully completed. Enter your details in the login form in the Personal Area.
x
Your message
was successfully sent x
was successfully sent x
Check your inbox for further instructions
x
Share your opinion
Questionnaire
Please evaluate our updated site user friendliness