Equipment selection
- Selection method:
- Air flow:
- Pressure:
Operating point
- Air flow: --
- Pressure: ---
Print version
Search results
Mode | Power | Current | Voltage | Power consumption | Current | Maximum air capacity | RPM | Sound pressure level at 3 m distance | Maximum transported air temperature | Protection rating | Weight | A | RPM | Noise level at 3 m | Spigot size | Phase | Number of poles | Frequency | Speed | Current | Power | RPM | Air capacity | IP Code | Modification | Voltage | RPM | Weight | Phase | Pressure | Frequency | Fan power | Sound pressure level at 3 m | Engine Type | Voltage | Current | Frequency | SEC Class | Power | SEC Class | SEC Class | Motor protection rating | Duct diameter | EC motor | Width | Height | Casing material | Outdoor mounting | Sound-insulated casing | Duct | Design | Type | Mounting | Smoke removal | Maximum air capacity | Maximum air capacity | Current | Max. transported air temperature | Current | Transported air temperature | Sound pressure level at 3 m distance | Low-powered motor | Highpowered motor | PM 2.5 filtration efficiency | High-power version | Sound- and heat-insulated casing | Low-powered motor | External rotor | High powered external rotor motor | Two-speed with external rotor | Double-speed motor | Low noise and low-powered motor | PM 2.5 filtration efficiency | Transported air temperature | Air capacity | * |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
min | - | - | - | - | - | 170 | - | - | - | IP X4 | - | - | 2030 | - | - | 1 | - | - | min | - | - | - | - | - | - | - | - | 4.6 | - | - | - | 24 | 24 | - | 230 | - | 50/60 | - | - | D | - | - | 100 | - | - | - | polymer coated steel | - | - | for round air ducts | - | supply and exhaust | floor mounting , wall mounting , ceiling mounting , Inline | - | - | - | 0.10 | 60 | - | - | - | - | - | - | - | yes | - | - | - | - | - | - | - | - | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). |
max | - | - | - | - | - | 240 | - | - | - | IP X4 | - | - | 2630 | - | - | 1 | - | - | max | - | - | - | - | - | - | - | - | 4.6 | - | - | - | 26 | 29 | - | 230 | - | 50/60 | - | - | D | - | - | 100 | - | - | - | polymer coated steel | - | - | for round air ducts | - | supply and exhaust | floor mounting , wall mounting , ceiling mounting , Inline | - | - | - | 0.11 | 60 | - | - | - | - | - | - | - | yes | - | - | - | - | - | - | - | - | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). |
- | - | - | 400 | 397 | - | - | 920 | 41 | - | IP X4 | 56 | - | - | - | - | 3 | 6 | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 600 | 300 | galvanized steel | - | - | for rectangular air ducts | centrifugal | - | Inline | - | - | - | 0.78 | - | - | - | - | - | - | - | - | yes | - | - | - | - | - | - | - | -20 … +70 | 2320 | - |
50 Hz | - | - | 400 | 800 | - | 12200 | 1320 | 69 | - | IP X4 | 16.4 | - | - | - | - | 3 | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.6 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
60 Hz | - | - | 400 | 910 | - | 12400 | 1585 | 69 | - | IP X4 | 16.4 | - | - | - | - | 3 | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.68 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
min | - | - | 230 | 44 | - | 230 | 700 | 15 | - | IP X4 | 16.5 | - | - | - | - | - | - | 50 | min | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | C | - | - | - | - | 150 | - | - | - | polymer coated steel | - | yes | for round air ducts | - | supply | wall mounting , ceiling mounting | - | - | - | 0.19 | - | - | - | - | - | - | - | - | - | - | - | - | - | yes | yes | 98 | - | - | - |
max | - | - | 230 | 52 | - | 340 | 1200 | 25 | - | IP X4 | 16.5 | - | - | - | - | - | - | 50 | max | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | C | - | - | - | - | 150 | - | - | - | polymer coated steel | - | yes | for round air ducts | - | supply | wall mounting , ceiling mounting | - | - | - | 0.23 | - | - | - | - | - | - | - | - | - | - | - | - | - | yes | yes | 97 | - | - | - |
- | - | - | 230 | - | - | 1040 | 3390 | - | - | IP X4 | 8.6 | - | - | - | - | 1 | - | 50/60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 123 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25...+55 | 1.02 | - | 43 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). |
50 Hz | - | - | 230 | - | - | 1970 | 1475 | 46 | - | IP 54 | 53 | - | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 304 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.84 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
60 Hz | - | - | 230 | - | - | 2310 | 1750 | 47 | - | IP 54 | 53 | - | - | - | - | - | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 383 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.72 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
50 Hz | - | - | 1~ 220-240 | 78 | - | 455 | 2760 | 46 | - | IP X4 | 3.2 | - | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | B | - | - | - | IP44 | 160 | - | - | - | galvanized steel | yes | - | for round air ducts | centrifugal | - | outdoor mounting , wall mounting , Inline | - | - | - | 0.34 | -25...+55 | - | - | - | no | - | - | - | - | - | - | - | - | - | - | - | - | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). |
60 Hz | - | - | 1~ 220-240 | 81 | - | 460 | 2820 | 46 | - | IP X4 | 3.2 | - | - | - | - | - | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | B | - | - | - | IP44 | 160 | - | - | - | galvanized steel | yes | - | for round air ducts | centrifugal | - | outdoor mounting , wall mounting , Inline | - | - | - | 0.35 | -25 +50 | - | - | - | no | - | - | - | - | - | - | - | - | - | - | - | - | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). |
- | - | 0.88 | - | - | - | - | - | 42 | - | IP X4 | - | - | - | - | - | - | - | - | - | - | 111 | - | 740 , 1264 | - | - | 200-277 | 2400 | 20 | 1 | - | 50/60 | - | - | - | - | - | - | - | - | B | - | - | 200 | yes | - | - | aluzinc | no | yes | for round air ducts | centrifugal | supply and exhaust | Inline | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25 ... +55 | - | - |
- | - | - | 230 | 94.8 | - | - | 3200 | - | - | IP X4 | - | - | - | - | - | 1 | - | 50/60 | - | 0.77 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | B | - | - | - | - | 150 | yes | - | - | galvanized steel | - | - | for round air ducts | centrifugal | - | Inline | - | - | - | - | -25 +60 | - | - | 35 | - | - | - | - | yes | - | - | - | - | - | - | - | - | 425 | - |
- | 48 | - | - | - | - | - | - | - | - | - | - | 0.23 | 1440 | 46 | - | - | 4 | - | - | - | - | - | - | IP X4 | - | 230 | - | 9 | 1 | - | 50 | - | - | - | - | - | - | - | - | - | B | IP44 | - | no | - | - | - | yes | no | - | centrifugal | exhaust | for roof | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25 ... +50 | 820 | - |
- | - | - | 400 | 1198 | - | - | 900 | 69 | - | IP X4 | 120 | - | - | - | - | 3 | 6 | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1000 | 500 | galvanized steel | - | - | for rectangular air ducts | centrifugal | supply and exhaust | Inline | - | - | - | 2.7 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25 ... +50 | 10500 | - |
- | - | - | 1~ 220-240 | - | - | 1800 | - | 49 | - | IP X4 | - | - | - | - | - | - | - | 50/60 | - | - | - | 3282 | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.34 | - | - | 168 | - | - | IP44 | 250 | - | - | - | polymer | - | - | for round air ducts | mixed-flow | - | Inline | - | - | 500 | - | -25...+55 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | 400 | 282 | - | - | 1300 | 52 | - | IP X4 | 17.5 | - | - | - | - | 3 | 4 | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 400 | 200 | galvanized steel | - | - | for rectangular air ducts | centrifugal | - | Inline | - | - | - | 0.60 | - | - | - | - | - | - | - | - | no | - | - | - | - | - | - | - | -25 ... +45 | 1470 | - |
50 Hz | - | - | 230 | 145 | - | - | 2300 | 53 | - | IP 24 | 5.9 | - | - | - | - | 1 | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2230 | - | - | - | 0.66 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
60 Hz | - | - | 230 | 178 | - | - | 2410 | 54 | - | IP 24 | 5.9 | - | - | - | - | 1 | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2280 | - | - | - | 0.79 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
50 Hz | - | - | 230 | 43 | - | 405 | 1300 | 32 | - | IP 24 | 2.5 | - | - | - | - | 1 | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.28 | 40 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
60 Hz | - | - | 230 | 33 | - | 470 | 1615 | 31 | - | IP 24 | 2.5 | - | - | - | - | 1 | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.21 | 40 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
50 Hz | - | - | 230 | 140 | - | 2500 | 1380 | 62 | - | IP 24 | 12 | - | - | - | - | 1 | 4 | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 350 | - | - | - | polymer coated steel | - | no | for round air ducts | axial | exhaust | for roof | - | - | - | - | - | 0.65 | -30...+60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
60 Hz | - | - | 230 | 147 | - | 2650 | 1700 | 63 | - | IP 24 | 12 | - | - | - | - | 1 | 4 | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 350 | - | - | - | polymer coated steel | - | no | for round air ducts | axial | exhaust | for roof | - | - | - | - | - | 0.66 | -30...+50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | 230 | 41 | - | 420 | 1250 | 38 | - | IP X2 | 9.8 | - | - | - | - | 1 | - | 50 | - | - | - | - | - | - | FFK | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 140 | - | - | - | galvanized steel | - | - | for round air ducts | centrifugal | supply | for chimney | - | - | - | 0.18 | 150 | - | - | - | - | - | - | - | yes | - | yes | no | no | - | - | - | - | - | - |
- | - | - | 230 | - | - | 563 | - | 60 | 25 +55 | IP X4 | 4.8 | - | - | - | 150 | - | - | 60 | - | - | - | - | - | - | - | - | - | - | - | 481.3 | - | - | - | 220V / 60Hz | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | 230 | 39 | - | 408 | - | 52 | 40 | IP 24 | 2.5 | - | - | - | 200 | - | - | 60 , 50 | - | - | - | - | - | - | - | - | - | - | - | 50 | - | - | - | 220V / 60Hz | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | 230 | 68 | 1070 | 1300 | 48 | IP 24 | 3.5 | - | - | - | 250 | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 220В / 50Гц | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||
- | - | - | 230 | 164 | - | - | 2900 | 46 | - | IP X4 | 5.1 | - | - | - | - | 1 | - | 50/60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 250 | yes | - | - | polymer coated steel | yes | - | for round air ducts | centrifugal | supply and exhaust | outdoor mounting , Inline | - | - | - | 1.15 | -25 +60 | - | - | - | no | - | - | no | - | - | - | - | - | - | - | - | - | 1230 | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). |
- | - | - | 400 | 274 | - | - | 930 | 45 | - | IP X4 | 24 | - | - | - | - | 3 | 6 | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 500 | 250 | galvanized steel | - | - | for rectangular air ducts | centrifugal | - | Inline | - | - | - | 0.67 | - | - | - | - | - | - | - | - | no | - | - | - | - | - | - | - | -20 … +60 | 1490 | - |
- | - | - | 3~380-480 | 2100 | - | 9160 | 1900 | 69 | - | IP X4 | - | - | - | - | - | 3 | - | 50/60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 450 | yes | - | - | polymer coated steel | - | - | for round air ducts | mixed-flow | - | Inline | - | - | - | 3.5 | -25 +40 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | 230 | 86 | - | 500 | 2670 | 38 | - | IP X4 | 17 | - | - | - | - | 1 | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | C | - | - | - | - | 160 | - | - | - | aluzinc | - | - | for round air ducts | centrifugal | supply and exhaust | Inline | - | - | - | 0.38 | -25...+55 | - | - | - | - | no | - | - | yes | no | - | - | - | - | - | - | - | - | - |
min | - | - | 230 | - | - | 320 | 700 | 16 | - | IP X4 | 15.92 | - | - | - | - | 1 | - | 50 | min | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | D | 92 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.41 | - | - | - | - | 47 | - | - | - | - | - | - | - | - | - | - | - | - |
max | - | - | 230 | - | - | 430 | 1200 | 27 | - | IP X4 | 15.92 | - | - | - | - | 1 | - | 50 | max | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | D | 117 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.55 | - | - | - | - | 41 | - | - | - | - | - | - | - | - | - | - | - | - |
TO COMPLETE THE REGISTRATION CLICK ON THE LINK SENT YOU BY EMAIL
x
Your registration has been successfully completed. Enter your details in the login form in the Personal Area.
x
Your message
was successfully sent x
was successfully sent x
Check your inbox for further instructions
x
Share your opinion
Questionnaire
Where have you learned about us?