Equipment selection
- Selection method:
- Air flow:
- Pressure:
Operating point
- Air flow: --
- Pressure: ---
Print version
Search results
Mode | Current | Voltage | Power consumption | Current | Maximum air capacity | RPM | Sound pressure level at 3 m distance | Maximum transported air temperature | Protection rating | Weight | RPM | Spigot size | Phase | High-powered motor | Number of flanges | Number of poles | Frequency | Speed | Power | Air capacity | Modification | Voltage | RPM | Weight | Phase | Pressure | Frequency | Current | Engine Type | Protection rating | SEC Class | Power | SEC Class | Motor protection rating | Duct diameter | EC motor | Width | Height | Casing material | Outdoor mounting | Sound-insulated casing | Duct | Design | Type | Mounting | Smoke removal | Maximum air capacity | Current | Max. transported air temperature | Current | Transported air temperature | Sound pressure level at 3 m distance | Low-powered motor | Highpowered motor | PM 2.5 filtration efficiency | SEC class* | Backdraft damper | Sound- and heat-insulated casing | Low-powered motor | Power | External rotor | High powered external rotor motor | Two-speed with external rotor | Double-speed motor | Low noise and low-powered motor | PM 2.5 filtration efficiency | Transported air temperature | Air capacity | Turbine protection rating | * | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
50 Hz | - | 230 | 68 | - | 1070 | 1300 | 37 | - | IP 24 | 3.5 | - | - | 1 | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.48 | 40 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
60 Hz | - | 230 | 76 | - | 1050 | 1450 | 38 | - | IP 24 | 3.5 | - | - | 1 | - | - | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.51 | 40 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
50 Hz | - | 230 | 145 | - | 2230 | 2300 | 60 | - | IP 24 | 10.5 | - | - | 1 | - | - | 2 | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 300 | - | - | - | polymer coated steel | - | no | for round air ducts | axial | exhaust | for roof | - | - | - | - | 0.66 | -30...+60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
60 Hz | - | 230 | 178 | - | 2280 | 2410 | 61 | - | IP 24 | 10.5 | - | - | 1 | - | - | 2 | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 300 | - | - | - | polymer coated steel | - | no | for round air ducts | axial | exhaust | for roof | - | - | - | - | 0.79 | -30...+50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | 230 | 115 | - | 520 | 1280 | 42 | - | IP X2 | 9.7 | - | - | 1 | - | - | - | 50 | - | - | - | KFK+GFK | - | - | - | - | - | - | - | - | - | - | - | - | - | 150 | - | - | - | galvanized steel | - | - | for round air ducts | centrifugal | supply | for chimney | - | - | 0.84 | 150 | - | - | - | - | - | - | - | - | yes | - | - | no | no | no | - | - | - | - | - | - | - | - |
- | - | 230 | 81 | - | 233 | - | - | 25 +55 | IP X4 | 3.2 | - | 100 | - | - | - | - | 60 | - | - | - | - | - | - | - | - | 431.3 | - | - | 220V / 60Hz | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | 230 | 101 | 0.12 | 799 | 1350 | 52 | 40 | IP 24 | 3.5 | - | 250 | - | - | - | - | 60 | - | - | - | - | - | - | - | - | 80 | - | - | 220V / 60Hz | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | 230 | - | 1.29 | - | - | 54 | - | - | 13 | 3300 | - | 1 | - | - | - | 50/60 | - | - | - | - | - | - | - | - | - | - | - | - | IPX4 | - | 161 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25 ... +60 | 1470 | IP55 | - |
- | - | 230 | 193 | - | 1100 | - | 45 | - | IP X4 | 12.85 | 2780 | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 200 | - | - | - | polymer coated steel | - | - | for round air ducts | centrifugal | supply and exhaust | Inline | - | - | 0.84 | -25 +45 | - | - | - | no | yes | - | - | - | yes | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | 230 | 283 | - | - | 890 | 39 | - | IP X4 | 52.5 | - | - | 1 | - | - | 6 | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 500 | 300 | galvanized steel | - | - | for rectangular air ducts | centrifugal | - | Inline | - | - | 1.59 | - | - | - | - | - | - | - | - | - | yes | - | - | - | - | - | - | - | - | - | -20 … +70 | 1550 | - | - |
- | - | 1~230 | 165 | - | 1500 | 2500 | 48 | - | IP X4 | 4.9 | - | - | - | - | - | - | 50/60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 315 | yes | - | - | plastic | - | - | for round air ducts | centrifugal | - | Inline | - | - | 1.15 | -25 +60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). |
min | - | 230 | 112 | - | 460 | 1250 | 25 | - | IP X4 | 18.5 | - | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | C | - | - | - | 150 | - | - | - | polymer coated steel | - | yes | for round air ducts | - | supply | wall mounting , ceiling mounting | - | - | 0.51 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | no | no | 95.6 | - | - | - | - | - |
max | - | 230 | 131 | - | 530 | 1430 | 27 | - | IP X4 | 18.5 | - | - | - | - | - | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | C | - | - | - | 150 | - | - | - | polymer coated steel | - | yes | for round air ducts | - | supply | wall mounting , ceiling mounting | - | - | 0.57 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | no | no | 95.6 | - | - | - | - | - |
- | - | 230 | - | - | 450 | 3750 | 43 | - | IP X4 | 4.8 | - | - | 1 | - | - | - | 50/60 | - | - | - | - | - | - | - | - | - | - | - | - | - | B | 40 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25...+55 | 0.37 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). |
- | - | 400 | 1850 | - | 25000 | 915 | 67 | - | IP X4 | 40 | - | - | 3 | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 3.7 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | 0.59 | - | - | - | - | - | 39 | - | IP X4 | - | - | - | - | - | - | - | - | - | 78 | 444 | - | 200-277 | 3270 | 12 | 1 | - | 50/60 | - | - | - | - | - | B | - | 125 | yes | - | - | aluzinc | no | yes | for round air ducts | centrifugal | supply and exhaust | Inline | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25 ... +50 | - | - | - |
- | - | 400 | 3429 | - | 11190 | - | - | - | IP X4 | 77.0 | 1800 | - | 3 | - | - | - | 50/60 | - | - | - | - | - | - | - | - | - | - | 5.00 | - | - | - | - | - | - | - | yes | - | - | galvanized steel | - | - | for rectangular air ducts | centrifugal | supply and exhaust | Inline | - | - | - | -25 +50 | - | - | 66 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | 1.77 | - | - | - | - | - | - | - | IP 44 | - | - | - | - | - | - | - | - | - | - | 1682 | - | 230 | 1400 | 33 | 1 | - | 50/60 | - | - | - | - | - | - | - | 250 | yes | - | - | aluzinc | no | yes | - | centrifugal | supply and exhaust | Inline | - | - | - | - | - | - | 41 | - | - | - | - | - | - | - | 374 | - | - | - | - | - | - | - | -25 ... +50 | - | - | - |
50 Hz | - | 230 | 447 | - | - | 1380 | 54 | - | IP X4 | 30 | - | - | 1 | - | - | 4 | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 600 | 350 | galvanized steel | - | - | for rectangular air ducts | centrifugal | supply and exhaust | Inline | - | - | 1.97 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30 … +60 | 4070 | - | - |
60 Hz | - | 230 | 679 | - | - | 1600 | 56 | - | IP X4 | 30 | - | - | 1 | - | - | 4 | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 600 | 350 | galvanized steel | - | - | for rectangular air ducts | centrifugal | supply and exhaust | Inline | - | - | 2.99 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30 … +60 | 4500 | - | - |
Min speed | - | 1~230 | - | - | 488 | 2550 | 34 | - | IP X4 | - | - | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | 0.15 | - | - | - | 34 | - | IP 20 | 150 , 160 | - | - | - | polymer | - | - | for round air ducts | mixed-flow | - | Inline | - | 136 | - | -25...+55 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Mid speed | - | 1~230 | - | - | 544 | 2704 | 35 | - | IP X4 | - | - | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | 0.16 | - | - | - | 37 | - | IP 20 | 150 , 160 | - | - | - | polymer | - | - | for round air ducts | mixed-flow | - | Inline | - | 151 | - | -25...+55 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Max speed | - | 1~230 | - | - | 600 | 2816 | 37 | - | IP X4 | - | - | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | 0.20 | - | - | - | 45 | - | IP 20 | 150 , 160 | - | - | - | polymer | - | - | for round air ducts | mixed-flow | - | Inline | - | 167 | - | -25...+55 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | 230 | 953 | - | 970 | 43 | -20 +50 | IP X4 | 45 | - | - | 1 | 1 | 4 | 6 | 50 | - | - | - | - | - | - | - | - | - | - | - | 220В / 50Гц | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
- | - | 230 | 179 | - | 810 | 1215 | 47 | - | IP X2 | 7.8 | - | - | 1 | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 200 | - | - | - | galvanized steel | - | - | for round air ducts | centrifugal | supply | for chimney | - | - | 0.99 | 150 | - | - | - | - | - | - | - | - | yes | - | - | yes | no | no | - | - | - | - | - | - | - | - |
- | - | 230 , 380-480 | 75 | - | 1340 | 1350 | 58 | IP X4 | 6.3 | - | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | 220В / 50Гц | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
- | - | 1~200-277 | 460 | - | 4080 | 1700 | 61 | - | IP X4 | - | - | - | 1 | - | - | - | 50/60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 355 | yes | - | - | polymer coated steel | - | - | for round air ducts | mixed-flow | - | Inline | - | - | 2.5 | -25 +40 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | 230 | 164 | - | 770 | 2580 | 42 | - | IP X4 | 22.6 | - | - | 1 | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | C | - | - | - | 200 | - | - | - | aluzinc | - | - | for round air ducts | centrifugal | supply and exhaust | Inline | - | - | 0.71 | -25...+55 | - | - | - | - | no | - | - | - | yes | no | - | - | - | - | - | - | - | - | - | - | - | - |
min | - | 230 | - | - | 230 | 700 | 15 | - | IP X4 | 13.96 | - | - | 1 | - | - | - | 50 | min | - | - | - | - | - | - | - | - | - | - | - | - | C | 44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.19 | - | - | - | - | 31 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
max | - | 230 | - | - | 340 | 1200 | 25 | - | IP X4 | 13.96 | - | - | 1 | - | - | - | 50 | max | - | - | - | - | - | - | - | - | - | - | - | - | C | 52 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.23 | - | - | - | - | 23 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
50 Hz | - | 400 | 337 | - | 6400 | 910 | 61 | - | IP 24 | 16.5 | - | - | 3 | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.9 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
60 Hz | - | 400 | 447 | - | 6520 | 1020 | 61 | - | IP 24 | 16.5 | - | - | 3 | - | - | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.95 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
50 Hz | - | 230 | 96 | - | 565 | 2400 | 58 | - | IP X4 | 4.53 | - | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | B | - | - | - | 150 | - | - | - | polymer coated steel | yes | - | for round air ducts | centrifugal , protecting screen | exhaust | outdoor mounting , wall mounting | - | - | 0.42 | 55 | - | - | - | - | - | - | - | yes | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
60 Hz | - | 230 | 96 | - | 595 | 2400 | 58 | - | IP X4 | 4.53 | - | - | - | - | - | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | B | - | - | - | 150 | - | - | - | polymer coated steel | yes | - | for round air ducts | centrifugal , protecting screen | exhaust | outdoor mounting , wall mounting | - | - | 0.44 | 55 | - | - | - | - | - | - | - | yes | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
TO COMPLETE THE REGISTRATION CLICK ON THE LINK SENT YOU BY EMAIL
x
Your registration has been successfully completed. Enter your details in the login form in the Personal Area.
x
Your message
was successfully sent x
was successfully sent x
Check your inbox for further instructions
x
Share your opinion
Questionnaire
Please evaluate our updated site user friendliness