Equipment selection
- Selection method:
- Air flow:
- Pressure:
Operating point
- Air flow: --
- Pressure: ---
Print version
Search results
Mode | Power | Current | Voltage | Power consumption | Current | Maximum air capacity | RPM | Sound pressure level at 3 m distance | Maximum transported air temperature | Protection rating | Weight | A | Max. air capacity | RPM | Noise level at 3 m | Maximum air flow capacity at cross directed | Maximal air flow capacity at straight directed | Spigot size | Phase | Number of poles | Impeller diameter | Impeller width | Frequency | Speed | Power | Air capacity | IP Code | Modification | Voltage | Maximum air capacity | RPM | Weight | Phase | Pressure | Frequency | Fan power | Sound pressure level at 3 m | Current | Maximum transported air temperature | Power consumption | Engine Type | Voltage | Current | Frequency | SEC Class | Power | SEC Class | Motor protection rating | Duct diameter | EC motor | Width | Height | Casing material | Outdoor mounting | Sound-insulated casing | Duct | Design | Type | Mounting | Smoke removal | Maximum air capacity | Maximum air capacity | Current | Max. transported air temperature | Current | Transported air temperature | Sound pressure level at 3 m distance | Low-powered motor | Highpowered motor | Low energy demand motor | High-power version | SEC class* | Backdraft damper | Sound- and heat-insulated casing | Low-powered motor | External rotor | High powered external rotor motor | Two-speed with external rotor | Double-speed motor | Low noise and low-powered motor | PM 2.5 filtration efficiency | Transported air temperature | Air capacity | * | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
min | - | - | - | - | - | 230 | - | - | - | IP X4 | - | - | - | 1650 | - | - | - | - | 1 | - | - | - | - | min | - | - | - | - | - | - | - | 4.6 | - | - | - | 25 | 23 | - | - | - | - | 230 | - | 50/60 | - | - | D | - | 125 | - | - | - | polymer coated steel | - | - | for round air ducts | - | supply and exhaust | floor mounting , wall mounting , ceiling mounting , Inline | - | - | - | 0.11 | 60 | - | - | - | - | - | - | - | - | - | yes | - | - | - | - | - | - | - | - | - | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). |
max | - | - | - | - | - | 340 | - | - | - | IP X4 | - | - | - | 2310 | - | - | - | - | 1 | - | - | - | - | max | - | - | - | - | - | - | - | 4.6 | - | - | - | 29 | 28 | - | - | - | - | 230 | - | 50/60 | - | - | D | - | 125 | - | - | - | polymer coated steel | - | - | for round air ducts | - | supply and exhaust | floor mounting , wall mounting , ceiling mounting , Inline | - | - | - | 0.13 | 60 | - | - | - | - | - | - | - | - | - | yes | - | - | - | - | - | - | - | - | - | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). |
- | - | - | 230 | 720 | - | - | 820 | 43 | - | IP X4 | 72 | - | - | - | - | - | - | - | 1 | 6 | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 600 | 350 | galvanized steel | - | - | for rectangular air ducts | centrifugal | - | Inline | - | - | - | 3.6 | - | - | - | - | - | - | - | - | - | - | yes | - | - | - | - | - | - | - | - | -20 … +60 | 2755 | - |
- | - | - | 220-240 | 95 | - | 900 | 2050 | 47 | - | IP X4 | 6.2 | - | - | - | - | - | - | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | 1 | - | - | - | - | - | - | - | - | - | - | - | C | - | - | - | 250 | - | - | - | polymer coated steel | - | - | for round air ducts | centrifugal | supply and exhaust | Inline | - | - | - | 0.47 | -25 +45 | - | - | - | no | no | yes | - | - | - | - | - | - | - | - | - | - | - | - | - | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). |
min | - | - | 230 | 92 | - | 320 | 700 | 16 | - | IP X4 | 18.5 | - | - | - | - | - | - | - | - | - | - | - | 50 | min | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | D | - | - | - | 150 | - | - | - | polymer coated steel | - | yes | for round air ducts | - | supply | wall mounting , ceiling mounting | - | - | - | 0.41 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | yes | no | 97 | - | - | - | - |
max | - | - | 230 | 117 | - | 430 | 1200 | 27 | - | IP X4 | 18.5 | - | - | - | - | - | - | - | - | - | - | - | 50 | max | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | D | - | - | - | 150 | - | - | - | polymer coated steel | - | yes | for round air ducts | - | supply | wall mounting , ceiling mounting | - | - | - | 0.55 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | yes | no | 96 | - | - | - | - |
50 Hz | - | - | 220-240 | 91 | - | 540 | 2770 | 45 | - | IP X4 | 4.7 | - | - | - | - | - | - | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | 1 | - | - | - | - | - | - | - | - | - | - | - | C | - | - | - | 150 | - | - | - | polymer coated steel | - | - | for round air ducts | centrifugal | supply and exhaust | Inline | - | - | - | 0.42 | -25 +45 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). |
60 Hz | - | - | 220-240 | 134 | - | 560 | 3125 | 46 | - | IP X4 | 4.7 | - | - | - | - | - | - | - | - | - | - | - | 60 | - | - | - | - | - | - | - | - | - | 1 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 150 | - | - | - | polymer coated steel | - | - | for round air ducts | centrifugal | supply and exhaust | Inline | - | - | - | 0.60 | -25 +45 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). |
50 Hz | - | - | 230 | 75 | - | - | 1350 | 44 | - | IP 24 | 5.0 | - | - | - | - | - | - | - | 1 | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1340 | - | - | - | 0.35 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
60 Hz | - | - | 230 | 92 | - | - | 1405 | 45 | - | IP 24 | 5.0 | - | - | - | - | - | - | - | 1 | - | - | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1475 | - | - | - | 0.4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
50 Hz | - | - | 230 | 68 | - | 1070 | 1300 | 37 | - | IP 24 | 3 | - | - | - | - | - | - | - | 1 | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.48 | 40 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
60 Hz | - | - | 230 | 76 | - | 1050 | 1450 | 38 | - | IP 24 | 3 | - | - | - | - | - | - | - | 1 | - | - | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.51 | 40 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
50 Hz | - | - | - | - | - | - | - | - | - | - | - | - | 405 | 1300 | 32 | - | - | - | - | - | - | - | - | - | - | - | IP 24 | - | 230 | - | - | 6.1 | 1 | - | - | - | - | - | 40 | 43 | - | - | 0.28 | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
60 Hz | - | - | - | - | - | - | - | - | - | - | - | - | 470 | 1615 | 31 | - | - | - | - | - | - | - | - | - | - | - | IP 24 | - | 230 | - | - | 6.1 | 1 | - | - | - | - | - | 40 | 33 | - | - | 0.21 | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | 400 | 1850 | - | 25000 | 915 | 67 | - | IP 24 | 42 | - | - | - | - | - | - | - | 3 | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 3.7 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | 3.43 | - | - | - | - | - | 58 | - | IP X4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 580 | - | - | - | 230 | 3610 | 1480 | - | 1 | - | 50/60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | 230 | 192 | - | 1190 | - | - | - | IP X4 | 10.0 | - | - | 3010 | - | - | - | - | 1 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 50/60 | - | - | 1.43 | - | - | - | - | - | - | - | - | - | - | - | yes | - | - | galvanized steel | - | - | - | centrifugal | supply and exhaust | Inline | - | - | - | - | -20 +50 | - | - | 47 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | - | - | - | - | - | - | - | IP X4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 11190 | - | - | 380-480 | - | 1800 | - | 3 | - | 50/60 | - | - | 5.00 | - | 3429 | - | - | - | - | - | - | - | - | - | yes | - | - | galvanized steel | - | - | - | - | - | - | - | - | - | - | - | - | - | 47 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25 ... +50 | - | - |
- | 1970 | - | - | - | - | - | - | - | - | - | - | 3.36 | - | 1400 | 66 | - | - | - | - | 4 | - | - | - | - | - | - | IP X4 | - | 400 | - | - | 81.4 | 3 | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | IP54 | - | no | - | - | - | yes | no | - | centrifugal | exhaust | for roof | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25 ... +50 | 13560 | - |
- | - | 3.3 | 230 | - | - | 3200 | - | 57 | - | IP X4 | 47.4 | - | - | 1452 | - | - | - | - | 1 | 4 | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 370 | - | IP55 | 355 | - | - | - | aluzinc | - | - | for round air ducts | centrifugal | exhaust | flush mounting | - | - | 889 | - | - | - | - | - | - | - | - | - | - | - | yes | - | - | - | - | - | - | - | - | -25...+120 | - | - |
- | - | - | 230 | 43 | - | 450 | 1165 | 39 | - | IP X2 | 9.8 | - | - | - | - | - | - | - | 1 | - | - | - | 50 | - | - | - | - | FFK | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 150 | - | - | - | galvanized steel | - | - | for round air ducts | centrifugal | supply | for chimney | - | - | - | 0.19 | 150 | - | - | - | - | - | - | - | - | - | yes | - | yes | no | no | - | - | - | - | - | - | - |
- | - | - | 230 | 155 | - | 904 | - | 63 | 25 +50 | IP X4 | 6.1 | - | - | - | - | - | - | 200 | - | - | - | - | 60 | - | - | - | - | - | - | - | - | - | - | 655 | - | - | - | - | - | - | 220V / 60Hz | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | 230 | 101 | 0.12 | 799 | 1350 | 52 | 40 | IP 24 | 3 | - | - | - | - | - | - | 250 | - | - | - | - | 60 | - | - | - | - | - | - | - | - | - | - | 80 | - | - | - | - | - | - | 220V / 60Hz | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
50 Hz | - | - | 1~230 | 56 | - | 190 | 2300 | 42 | - | IP X4 | 3.4 | - | - | - | - | - | - | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | C | - | - | - | 100 | - | - | - | galvanized steel , ABS plastic | - | - | for round air ducts | centrifugal | ceiling mounting | - | - | - | 0.34 | -25 +45 | - | - | - | - | - | - | - | - | yes | - | yes | - | - | - | - | - | - | - | - | - | - | |
60 Hz | - | - | 1~230 | 58 | - | 205 | 2570 | 43 | - | IP X4 | 3.4 | - | - | - | - | - | - | - | - | - | - | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | C | - | - | - | 100 | - | - | - | galvanized steel , ABS plastic | - | - | for round air ducts | centrifugal | ceiling mounting | - | - | - | 0.35 | -25 +45 | - | - | - | - | - | - | - | - | yes | - | yes | - | - | - | - | - | - | - | - | - | - | |
- | - | - | 230 | 164 | - | - | 2900 | 48 | - | IP X4 | 7.3 | - | - | - | - | - | - | - | 1 | - | - | - | 50/60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 315 | yes | - | - | polymer coated steel | yes | - | for round air ducts | centrifugal | supply and exhaust | outdoor mounting , Inline | - | - | - | 1.15 | -25 +60 | - | - | - | no | - | - | no | - | - | - | - | - | - | - | - | - | - | - | - | 1370 | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). |
- | - | - | 230 | 283 | - | - | 890 | 47 | - | IP X4 | 33 | - | - | - | - | - | - | - | 1 | 6 | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 500 | 300 | galvanized steel | - | - | for rectangular air ducts | centrifugal | - | Inline | - | - | - | 1.59 | - | - | - | - | - | - | - | - | - | - | no | - | - | - | - | - | - | - | - | -20 … +70 | 1550 | - |
- | - | - | 1~200-277 | 1050 | - | 8600 | 1290 | 65 | - | IP X4 | - | - | - | - | - | - | - | - | 1 | - | - | - | 50/60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 500 | yes | - | - | polymer coated steel | - | - | for round air ducts | mixed-flow | - | Inline | - | - | - | 5.4 | -25 +40 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | 230 | 84 | - | 485 | 2620 | 38 | - | IP X4 | 17 | - | - | - | - | - | - | - | 1 | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | C | - | - | - | 150 | - | - | - | aluzinc | - | - | for round air ducts | centrifugal | supply and exhaust | Inline | - | - | - | 0.37 | -25...+55 | - | - | - | - | no | - | - | - | - | yes | no | - | - | - | - | - | - | - | - | - | - |
- | - | - | 230 | 264 | - | 560 | 2630 | 70 | - | IP X4 | 4.8 | - | - | - | - | - | - | - | 1 | 2 | 160 | 62 | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | polymer coated steel | yes | - | for round air ducts , for rectangular air ducts | centrifugal | outdoor mounting , wall mounting | - | - | - | 1.17 | -25 +50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
50 Hz | - | - | 230 | 55 | - | 860 | 2300 | 48 | - | IP 24 | 3.0 | - | - | - | - | - | - | - | 1 | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.26 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
60 Hz | - | - | 230 | 61 | - | 875 | 2550 | 49 | - | IP 24 | 3.0 | - | - | - | - | - | - | - | 1 | - | - | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.28 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | 400 | 2000 | - | - | - | 59 | - | IP X4 | 136 | - | - | 890 | - | 15830 | 14880 | - | 3 | 6 | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 710 | - | - | - | aluzinc | - | - | for square air ducts , for round air ducts | centrifugal | supply and exhaust | Inline | - | - | - | 3.90 | -20 +40 | - | - | - | - | no | - | - | - | - | yes | - | - | - | - | - | - | - | - | - | - | - |
TO COMPLETE THE REGISTRATION CLICK ON THE LINK SENT YOU BY EMAIL
x
Your registration has been successfully completed. Enter your details in the login form in the Personal Area.
x
Your message
was successfully sent x
was successfully sent x
Check your inbox for further instructions
x
Share your opinion
Questionnaire
Is our site helpful for your business development?