Domestic fans 
Industrial and commercial fans 
Single-room ventilation systems with heat recovery 
Air handling units 
Air heating systems 
Air sterilizers 
Smoke extraction and ventilation 
Accessories for ventilating systems 
Electrical accessories 
Ventilation ducts and fittings 
Air distribution components 
Ventilation kits and vents VENTS 125 Solid TH
- Characteristics
- Capacity diagram
- Downloads
- Options
- Dimensions
Characteristics
Characteristics
| Parameter | Value | Measurement unit |
|---|---|---|
| Voltage | 220-240 | V |
| Frequency | 50 | Hz |
| Power consumption | 18.0 | W |
| Air capacity | 155 | m³/h |
| Current | 0.11 | A |
| RPM | 2200 | min-1 |
| Sound pressure level at 3 m | 33 | dBА |
| Weight | 0.75 | kg |
| Spigot size | 125 | mm |
| Design | axial | - |
| IP Code | IP 44 | - |
| Type | exhaust | - |
| Mounting | wall mounting , ceiling mounting | - |
Capacity diagram
Capacity diagram
- Selection method:
- Air flow:
- Pressure:
Operating point
- Air flow: --
- Pressure: ---
Files archieve
Downloads
Modifications
Modifications
| Modification name | Backdraft damper | Humidity sensor | Timer | |
|---|---|---|---|---|
| VENTS 125 Solid TH |
|
|
|
|
Dimensions
Characteristics
| Parameter | Value | Measurement unit |
|---|---|---|
| Ø D | 123.5 | mm |
| B | 180 | mm |
| L | 85 | mm |
| L1 | 38 | mm |
Legend
Legend
| PICTURE SYMBOL | DESIGNATION | MODIFICATION DESCRIPTION |
 |
Solid L | Modification with a ball bearing motor for long service life (around 40 000 operating hours). Installation at any angle is possible. The ball bearings require no maintenance and are greased for the entire service life. |
 |
Solid T | Modification with a regulated turn-on delay timer. |
|
Solid T1 | Modification with a turn-on delay timer regulated from 10 seconds to 2 minutes and a turn-off delay timer regulated from 2 up to 30 minutes. |
 |
Solid TH | Modification with a turn-off delay timer regulated from 2 up to 30 minutes and a humidity sensor regulated from 60% up to 90%. |
 |
Solid V | Modification with a pull-cord switch. |
|
Solid VT | Modification with a pull-cord switch and a turn-off delay timer regulated from 2 up to 30 minutes. |
|
Solid VTH | Modification with a pull cord switch, turn-off delay timer regulated from 2 up to 30 minutes and a humidity sensor regulated from 60% up to 90%. |
Accessories
