Login

Privacy Policy (GDPR)
Authorization
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Product consultation from our experts - Online
Registration
Signup
By using this form, you confirm that you have read the site terms of use Terms of use and completely accept the terms of use

VENTS CO2-1

  • Description
  • Characteristics
  • Downloads
  • Dimensions
Description
Description
APPLICATION
  • The sensor is designed for indoor carbon dioxide concentration measurement and respective air flow regulation through the control output signal to the fan.
  • Air flow control based on СО2 concentration is an efficient energy saving solution.
DESIGN AND COMPATIBILITY
  • The sensor has two separate outputs: a normally opened dry relay contact and an analogue output 0…10 V (this output is adjustable for 2…10 V/0…20 mA/4…20 mA).
MODIFICATIONS
  • The sensor is available in two modifications: CO2-1 and CO2-2.
  • The CO2-1 model incorporates LED lights for CO2 concentration and operation buttons indicating the level of three operation modes.
MOUNTING AND POWER SUPPLY
  • The sensor is designed for wall surface mounting.
  • 24 VAC low current power supply.
  • If power supply 24 V is not available, connect the TRF plug that is offered as an accessory.
ACCESSORIES
  • Power supply unit is applied for connection of the sensor to 220 V (model TRF-220/24-1,6) or 120 V (TRF-120/24-1,6) AC power mains.

Characteristics
Characteristics
Parameter CO2-1
Measurement unit
Power supply/ power consumption Power supply/ power consumption 24 VAC (50/60 Hz ± 10%), 24 VDC/1.6 W Max W
Gas detection analyzer Gas detection analyzer Non-dispersive infrared detector (NDIR) with self-calibration system -
CO2 measuring range CO2 detection range 0–2,000 ppm (parts per million) -
Accuracy at 25°С (77°F), 2000 ppm Accuracy at 25°С (77°F), 2000 ppm ±30 ppm + 3 % of reading -
Response time Response time max. 2 min -
Warm up time for each turning-on Warm up time for each turning-on 2 hours (first time), 2 minutes (operation) -
Analogue output Analogue output t 0–10VDC (default), 4–20mA selectable by jumpers -
On/Off output On/Off output 1X2A switch load Four set points selectable by jumpers -
6 LED lights for CO2 concentration indication 1st green indicator lights when CO2 concentration is below 600 ppm;, 1st and 2nd green indicators light when CO2 concentration is 600–800 ppm;, 1st yellow indicator lights when CO2 concentration is 800–1200 ppm;, 1st and 2nd yellow indicators light when CO2 concentration is 1200–1400 ppm;, 1st red indicator lights when CO2 concentration is 1400–1600 ppm;, 1st and 2nd red indicators light when CO2 concentration is above 1600 ppm -
Operating conditions/ storage recommendations Operating conditions/ storage recommendations 0–50 °C; 0–95 % RH non condensing/0–50 °C -
Weight/ Dimensions Net weight/ Dimensions 0.120 kg/100 mm х 80 mm х 30 mm kg
Mounting outdoor mounting -
Files archieve
Downloads
Select document type
  • Advertising and printing products
  • Certificates
  • Technical documentation
Name
Download high quality image "CO2-1" (psd 1.93Mb)
Download high quality image "CO2-2" (psd 1.89Mb)
"CO2" product description 01-2023 (pdf 248.1Kb)
"CO2-2" user's manual 11-2015 (CO2-2_V90-2EN-02) (pdf 114.94Kb)
"CO2-1" user's manual 05-2017 (CO2_1_V90-1EN-02) (pdf 105.24Kb)
Download image "CO2-1" for your website (png 380.44Kb)
Download image "CO2-2" for your website (png 341.78Kb)
Dimensions
Characteristics
Parameter Value Measurement unit
Similar products
Share your opinion

Questionnaire
Is our site helpful for your business development?