Login

Privacy Policy (GDPR)
Authorization
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Product consultation from our experts - Online
Registration
Signup
By using this form, you confirm that you have read the site terms of use Terms of use and completely accept the terms of use

VENTS DRF-OV 250

  • Description
  • Characteristics
  • Downloads
  • Dimensions
Description
Description
APPLICATIONS DESIGN
  • The destratificators are used in industrial workshops, stocks, supermarkets, exhibition and concert halls, closed sport halls, etc.
  • The destratificators are recommended for use in large premises above 5 m height where warmer air due to natural air convection is accumulated closer to ceiling whereas air temperature in the occupied area (2 m above floor level) remains lower.
  • The destratificator consists of an axial fan that is attached to the casing with anti-vibration mounts.
  • The DRF-OV and DRFI-OV destratificator casing is made of polymer-coated steel.
  • The DRFI-OV casing is perforated and has mineral wool insulation to attenuate sound produced by the axial fan.
  • The directing vanes are located at outlet from the DRFI-OV to provide a long linear air flow.
DESCRIPTION
  • Warm air is accumulated above in the heated high premises.
  • Air temperature rises per 1 °C for each meter upwards, which results in heat losses through the roof.
  • The destratificators direct warm air accumulated under the ceiling to the occupied area. The temperature difference between a floor and a ceiling is minimized.
  • The destratificators are designed to reduce heat losses and heating costs.

The destratificator is mounted with an arched fixing bracket with position fixation pitch each 15° and a thread-connected mounting and a safety ropes, each 3 m long.

MOTOR SPEED CONTROL
  • The destratificator is equipped with a single-phase asynchronous external rotor motor and an axial impeller.
  • The motors have built-in overheating protection with automatic restart.
  • The motors are equipped with ball bearing.
  • Ingress Protection Rating IP 44.
  • Step or smooth speed control with a thyristor or autotransformer speed controller.
  • One speed controller is able to control several destratificators on condition that the total power and operating current do not exceed the controller rated parameters.
SELECTION
  • The destratificator selection is based on the assumption that the destratificator operation distance correlates to the premise height as 1:1.25. Number of the destratificators to be installed in the premise is selected on the assumption that the total air capacity is 1 to 2 premise volume.
MOUNTING
  • The destratificator is for indoor installation in weather-protected premises.
  • The destratificators are designed for mounting under a ceiling with a directing nozzle downwards.
  • The destratificator must be either rigidly fixed to a bearing structure or for suspended with a mounting kit supplied with the delivery.
  • The destratificator is connected to power mains via an external terminal box.
  • Electric connections and installations must comply with the product manual and a wiring diagram on the terminal block.
VENTS DRF-OV application example at a stock Uneven distribution of warm and cold air flows in the room without destratificators
Even distribution of warm and cold air flows in the room with destratificators
Characteristics
Characteristics
Parameter DRF-OV 250
Measurement unit
Engine Type 220В / 50Гц -
Phase 1 ˜
Voltage 230 V
Frequency 50 Hz
Current A
Sound pressure level at 3 m distance 53 dBА
Air capacity 800 m³/h
Power consumption 50 W
RPM 1380 min-1
Maximum transported air temperature 60 °С
Protection rating IP X4 -
Weight 6 kg
Air reach distance Air reach distance 8 mm
Range of air stream Range of air stream 6-9 -
Influence area Influence area 28-64
Files archieve
Downloads
Select document type
  • Advertising and printing products
  • Certificates
  • Technical documentation
Name
Download image "VENTS DRF-OV" for your website (png 318.77Kb)
Download high quality image "VENTS DRF-OV" (psd 1.45Mb)
Download image "VENTS DRFI-OV" for your website (png 301.37Kb)
Download high quality image "VENTS DRFI-OV" (psd 1.27Mb)
"VENTS DRF-OV and DRFI-OV" product description 02-2016 (pdf 225.41Kb)
"VENTS DRF-OV and DRFI-OV" user's manual 05-2021 (V96EN-05) (pdf 1.13Mb)
Dimensions
Characteristics
VENTS DRF-OV 250
Parameter Value Measurement unit
∅D 341 mm
ØD1 260 mm
ØD2 9.1 mm
A 390 mm
H 524 mm
H1 386 mm
Share your opinion

Questionnaire
Basic parameter for domestic fan selection