IsoVent N/127/7.6

Description

DESCRIPTION

FEATURES

Pollution-free flexible air duct insulated with mineral wool layer.
No harmful products emission during operation.
No chlorine and cadmium content.
High elasticity and temperature resistance: short-time resistance up to +120 °C.

RECOMMENDED APPLICATION

Applied in residential and industrial ventilation, air conditioning and heating systems with special flammability and temperature resisting requirements, in particular for application with the need of heat insulation combined with flexible air ducts to prevent condensate generation and heat and cold losses as well as in peripheral sections of large central utility systems with the maximum pressure 3000 Pa.
Recommended for ventilation of child care centres, educational and medial facilities, spa resorts.

Characteristics

Parameter	IsoVent N/127/7.6	Measurement unit
Air duct base	Metallized polyester film (45 μm)	-
Air duct wire	Steel spring, 0.8-1.5 mm thick	-
Outer sleeve	metalized polyester film (45 μm)	-
Operating temperature range	-30...+120	°С
Standard length	7.6	m
Available lengths (cutting)	7.6	m
Air speed	30	m/s
Maximum operating pressure	3000	Pa
Insulation	25 mm mineral wool	-

Files archieve

Downloads

Dimensions

Characteristics

Colour range

Aluminium

(_)

Packing

Cardboard box

Order code

Isovent N

length

Accessories

Diffusers and air disk valves

Grilles and hoods

Pressure loss diagram

PRESSURE LOSS DIAGRAM PER 1 M STRETCHED AIR DUCT

Calculation example

Select a curve that matches the air duct diameter [mm], 200 mm in this case.
Find the intersection point of this line with the vertical line of the required air flow in m³/h, 500 m³/h in this case.
The horizontal line that shows the pressure loss in Pa per 1 m straight air duct crosses this intersection point.
Multiply pressure loss value (2.4 Pa/m at 20 °C) by total air duct length to get the total pressure loss value. To calculate pressure loss in case of bends consider each bend as extra air duct meter.