Login

Privacy Policy (GDPR)
I forgot my password
Authorization
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Product consultation from our experts - Online
Registration
Signup
By using this form, you confirm that you have read the site terms of use Terms of use and completely accept the terms of use
Authorization
Menu
    Signup & Login
    EN
    About us

    RNS-16

    RNS-16
    • RNS-16
    zoom
    • RNS-16
    Print versionSave in PDF format
    Add to project
    Add to compare
    • Description
    • Characteristics
    • Downloads
    • Dimensions
    • Wiring plan
    Description
    Description
    APPLICATIONS DESIGN AND CONTROL
    • Applied in ventilation systems for regulating the power output of electric heaters with load current rating up to 120 A.
    • The controller casing is made of flame-retardant thermoplastic.
    • The controller is equipped with an ON/OFF button and a heating temperature control knob.
    • Electric power output is regulated by proportional connection and disconnection of the full load depending on the pre-set heating temperature.
    • The RNS-16 is capable of controlling only one heating stage.
    • Unlike the smaller models, RNS-25 are capable of controlling one or three heating stages with the power output equal or exceeding that of the controlled stage.
    • The power output of the first stage is controlled steplessly by switching the full load on and off.
    • The second and third stages are controlled in steps.
    • For overheating protection the electric heater must be equipped with two built-in thermal contacts: TK50 with intervention temperature of +50 °C and automatic restarting and ТК90 with response temperature of +90 °С andmanual restarting.
    • The air temperature is set by means of the built-in potentiometer or the external control device generating a 0-10 V control input for increasing the duct temperature proportionally in the range from 0 to +40 °C.
    • The duct temperature sensor must be installed downstream of the heater in the direction of the air stream at the minimum distance of 50 cm from the heater.
    • If the controller runs in the heating power output mode in disregard of the temperature sensor feedback, no duct temperature sensor is necessary whereas the heating power output is regulated in the 0 to 100% range by means of the 0-10 V control signal.
     
    PROTECTION
    • Input circuit of the power controller has a thermal fuse for overload protection.
    MOUNTING
    • The controller is designed for indoor mounting.
    • Installation shall be performed with respect to the free air circulation for inner circuit cooling.
    • The controller is for vertical installation.
    • Do not install the controller above the heaters and in bad air convection areas.
     
     
     
     
     
     
     
     
     
     
    CONTROL PARAMETERS
     
    Regulation time [s] 0,1 (fixed)
    Cycle length [s] 1...10 ((adjustable) 
    Indication Power, operation and malfunction indicator
    Type of temperature sensor used LM 60 
    Input signal parameters [V] 0...10 (direct current) 
    Set temperature range [°C] 0...40 (adjustable)
    Characteristics
    Characteristics
    Parameter RNS-16
    		 Measurement unit
    Frequency Frequency 50 Hz
    Max. load current (single stage) Max. load current (single stage) 25 A
    Heater power (single stage) Heater power (single stage) 16 kW
    Control circuit supply voltage Control circuit supply voltage 230 V
    Cross-section area of screw terminal block input pin Cross-section area of screw terminal block input pin 4...10 mm²
    Protection rating IP 54 -
    Overall dimensions LxWxH 170х255х140 mm
    Mains parameters: Mains parameters: voltage [V]: 210-255, 380-415
    frequency [Hz]: 50-60
    phases: 1 or 3     		-
    Operating temperature range Operating temperature range +5...+40 °С
    Weight Weight 1.2 kg
    Files archieve
    Downloads
    Select document type
    • Advertising and printing products
    • Certificates
    • Technical documentation
    Name
    Download
    Show
    "RNS" product description 06-2015 (pdf 103.97Kb)
    Download high quality image "RNS" (psd 2.57Mb)
    Download image "RNS" for your website (png 644.19Kb)
    "RNS" user's manual 05-2021 (V116-2EN-03) (pdf 847.63Kb)
    Dimensions
    Characteristics
    Parameter Value Measurement unit
    Wiring plan
    Wiring plan

    External connections diagram

    Control unit wiring diagrams

    Attention!
    THE CONTROLLER IS INTENDED FOR VERTICAL MOUNTING ONLY!

    This site use cookies. By accepting cookies you can optimize your browsing experience. Please read our Privacy Policy for more information.
    Privacy Policy (GDPR)
    Close
    Share your opinion

    Questionnaire
    Basic parameter for domestic fan selection