Login

Privacy Policy (GDPR)
Authorization
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Product consultation from our experts - Online
Registration
Signup
By using this form, you confirm that you have read the site terms of use Terms of use and completely accept the terms of use

VENTS RS-10,0-TA

  • Description
  • Characteristics
  • Downloads
  • Dimensions
  • Wiring diagram
  • Dimensions
Description
Description
APPLICATIONS DESIGN AND CONTROL
  • Applied in ventilation systems for switching ON/OFF and speed controlling of single phase power-controlled motors.
  • Several fans can be operated synchronously in case their total consumption current does not exceed the maximum permissible value of the controller current.
  • The controller casing is made of flame-retardant thermoplastic and fitted with ON/OFF knob.
  • Output power is controlled from 30 to 100% as a function of the control signal 0…10V or 4-20mA over the range set during the controller adjustment.
  • The control signal type 0...10V or 4-20mA is selected with SW2 control switch located in the controller casing.
  • Control can be performed by means of remote control panel, i.e., R-1/010 controller.
  • The minimum speed is set by means of the potentiometer at PCB inside the controller.
  • The controller is equipped with a supplementary 230V terminal for connection and control of such external equipment as actuator driven air dampers.
PROTECTION
  • Input circuit of the speed controller has a thermal fuse for overload protection.
MOUNTING
  • The controller is designed for indoor mounting.
  • Installation shall be performed with respect to the free air circulation for inner circuit cooling.
  • The controller is for vertical installation.
  • Do not install the controller above the heaters and in bad air convection areas.
Device operating position
Characteristics
Characteristics
Parameter RS-10,0-TA
Measurement unit
Voltage 230 V
Frequency 50/60 Hz
Minimum current Minimum current 1 A
Maximum current 10 A
Maximum ambient temperature -20...+35 °С
Phase Phase 1 -
Casing material Casing material flame-retardant thermoplastic -
Protection rating IP 54 -
Overall dimensions LxWxH 180x127x95 mm
Weight Weight 1.08 kg
Files archieve
Downloads
Select document type
  • Advertising and printing products
  • Certificates
  • Technical documentation
Name
Download high quality image "RS-…-TA" (psd 1.93Mb)
"RS-…-TA" product description 07-2021 (pdf 293.23Kb)
Download image "RS-…-TA" for your website (png 449.15Kb)
"RS-...-TA" user's manual 02-2023 (V47-7EN-02) (pdf 1.35Mb)
Dimensions
Characteristics
Parameter Value Measurement unit
Wiring diagram
Wiring diagram

Wiring diagram and connections
L Power (230 VAC/50-60 Hz)
N Neutral
PE Ground terminal
L1 Non-adjustable output, (230 V/max. 2 A)
U1, U2 Adjustable motor output
SW Remote switch/timer switch
A Modbus RTU (RS485), signal A
/B Modbus RTU (RS485) signal /B
+V Power output +12 VDC/1 mA
Ai Analogue input 0-10 V/0-20 mA (10-0 V/20-0 mA)/ Logic input (timer function)
GND Grounding
Dimensions
Dimensions

Share your opinion

Questionnaire
Please evaluate our updated site user friendliness