VENTS Stream 100/125 EC S

Print version Save in PDF format

Sound- and heat-insulated mixed flow duct fan with air flow up to 450 m³/h and with EC motor.

Add to project

Add to compare

Description
Characteristics
Downloads
Dimensions
Capacity diagram
Dimensions
Designation key

Description

APPLICATION
The VENTS Stream EC series of duct fans is available in a special sound-insulated casing that ensures silent fan operation with high aerodynamic performance. Compatible with Ø100 to 160 mm air ducts. The VENTS Stream EC fans combine wide capabilities and high technical parameters of axial and centrifugal fans, providing powerful air flow and high pressure as well as cost-effectiveness and manageability of the EC motor.	100% variable speed, multiple fans can be connected to a computer control system equipped with sensors. Application: intended for supply and exhaust ventilation systems of different commercial and industrial premises with high demands on energy efficiency and noise level (libraries, conference halls, educational institutions, kindergartens etc.).
DESIGN
The outer casing is made of high quality and durable plastic. The internal perforation of the casing allows sound waves to pass through, directing them at a certain angle onto a layer of sound-insulating material. Heat- and sound-insulation of the casing are made of a 50 mm layer of non-flammable mineral wool. The special perforation of the casing and the sound-absorbing material ensure that sound is attenuated over a wide frequency range.	Due to the conic impeller and special blade profiling the circumferential air speed increases thus providing higher air pressure and capacity as compared to standard axial fans. The diffuser, the specially profiled impeller and the directing vanes at the outlet of the fan casing distribute air flow in such a way as to attain the best combination of high performance and high pressure at low noise level. The fan casing is equipped with an outer airtight terminal box for connection to power mains.

ELECTRIC MOTOR
The units are equipped with highly efficient electronically commutated EC motors. These state-of-the-art motors are the most advanced solution in energy efficiency today.	EC motors are characterised with high performance and optimum control across the entire speed range. In addition to that, the efficiency of the electronically commutated motor reaches very impressive levels of up to 90 %.
SPEED CONTROL
The fan is controlled with the 0-10 V control signal (capacity control is performed depending on the temperature, humidity, pressure and other parameters). When the value of the control factor changes, the EC fan changes the rotation speed and supplies exactly the amount of air required by the ventilation system. Maximum fan speed does not depend on the available current frequency and is suitable for operation both at 50 and 60 Hz.	Several fans can be integrated into a single computer-driven control system. Custom designed software provides high accuracy control of the fans integrated into a network. The computer display shows all the system parameters and the operation mode can be set individually for each fan in the network.
MOUNTING
The fans are intended for mounting to round air ducts. The fan casing has mounting brackets for floor, wall or ceiling mounting. Any installation angle relative to the fan axis is permissible. Access for the fan maintenance shall be provided during mounting.	For wiring installation and mounting of the fan follow the guidelines in the user's manual and wiring diagram on the terminal box. Several fans may be installed in one system in parallel to attain higher air capacity or in series to increase operating pressure in the system.

Characteristics

Parameter	Stream 100/125 EC S	Stream 100/125 EC S	Measurement unit
Spigot diameter	100	125	mm
Phase	1	1	˜
Voltage	230	230	V
Frequency	50/60	50/60	Hz
Current	0.36	0.37	A
Power	39	39	W
Maximum air capacity	82	125	l/s
EC motor	yes	yes	-
Maximum air capacity	295	450	m³/h
Sound pressure level at 3 m	31	33	dBА
RPM	3168	3138	min^-1
Protection rating	IP X4	IP X4	-
Motor protection rating	IP44	IP44	-
Design	mixed-flow	mixed-flow	-
Transported air temperature	-25 ... +55	-25 ... +55	°С
Weight	5	5	kg
Sound- and heat-insulated casing	yes	yes	-
Casing material	plastic	plastic	-
Outdoor mounting	no	no	-
Duct	for round air ducts	for round air ducts	-
Type	supply and exhaust	supply and exhaust	-
Mounting	Inline	Inline	-

Files archieve

Downloads

Dimensions

Characteristics

Parameter	Value	Measurement unit

Capacity diagram

Stream 100/125 EC S (spigot 100 mm)

Sound power level		Octave frequency bands [Hz]									LpA, 3 m dBA	LpA, 1 m dBA
	Hz	Gen.	63	125	250	500	1000	2000	4000	8000	LpA, 3 m dBA	LpA, 1 m dBA
L_wA to inlet	dBA	60	36	55	58	47	40	37	41	33	39	49
L_wA to outlet	dBA	59	32	51	58	46	36	35	41	35	38	48
L_wA to environment	dBA	52	32	49	48	39	34	30	29	24	31	41

Stream 100/125 EC S (spigot 125 mm)

Sound power level		Octave frequency bands [Hz]									LpA, 3 m dBA	LpA, 1 m dBA
	Hz	Gen.	63	125	250	500	1000	2000	4000	8000	LpA, 3 m dBA	LpA, 1 m dBA
L_wA to inlet	dBA	63	39	58	61	50	42	39	43	35	43	53
L_wA to outlet	dBA	60	33	53	59	47	37	36	42	36	40	50
L_wA to environment	dBA	54	34	51	50	41	35	30	30	25	33	43

Dimensions

Type	Dimensions [mm]
Type	ØD	B	L	H
Stream 100/125 EC S (spigot 100 mm)	100	253	752	273
Stream 100/125 EC S (spigot 125 mm)	125	253	689	273

Designation key

Series	Air duct diameter	Motor type		Options
VENTS Stream: mixed-flow fan in sound-insulated casing	100/125 150/160	ЕС: synchronous electronically commutated motor	S: high-powered motor	Un: speed controller with an electronic thermostat and external temperature sensor fixed on 4 m cable. Equipped with a power cord and an electric plug. Temperature-based operation logic. R: power cord with mains plug. P: built-in smooth speed controller.