TS-1-90

Description

APPLICATIONS	DESIGN AND CONTROL
The temperature regulator is designed for chimney fan control and applied for hot air distribution from chimney to the premises VENTS KAM T1, VENTS KAM Eco T1, VENTS KAM EcoDuo T1.	The temperature regulator casing is made of metal and equipped with the temperature control knob. The casing is connected with the temperature probe by means of a capillary tube of 1 m length. The temperature level is followed by the temperature probe which is installed directly inside the fireplace heat-exchanger. The temperature regulator controls the fan operation and switches the chimney fan on or off depending on the set temperature increase or decrease.
MOUNTING
The temperature regulator is mounted in the concealed or external mounting box. The temperature probe is installed inside the fireplace heat-exchanger. The temperature regulator shall be installed away from the source of air heating.

Characteristics

Parameter	TS-1-90	Measurement unit
Voltage	230	V
Maximum current	2.2	A
Temperature range	0...+90	°С
Phase	1	-
Maximum fan power	500	W
Overall dimensions of the thermostat casing	55 х 56 х 56	mm
Capillary tube length	1000	mm
Temperature probe	ø 6.5 х 95	-
Maximum ambient temperarture for the casing	+80	°С
Maximum temperature for the temperature probe and capillary tube	+150	°С
Frequency	50/60	Hz
Protection rating	IP 40	-