VENTS 100 Solid

Print version Save in PDF format

Air capacity up to 85 m³/h.

Add to project

Add to compare

Description

APPLICATIONS

Permanent or intermittent extract ventilation of shower rooms, bathrooms, kitchens and other residential premises.
Ventilation of premises with high requirements to noise level.

COLOUR MODIFICATIONS


Solid	Solid Red	Solid Black Sapphire	Solid Dim	Solid Glass	Solid Glass Red	Solid Glass Black	Solid Alu	Solid Chrome
front panel in white, basic model	front panel in red	front panel in black	white matte front panel	front panel made of white natural glass	front panel made of red natural glass	front panel made of black natural glass	front panel with a stainless steel trim	front panel with a polished stainless steel trim

DESIGN

Modern design and aesthetic look.
The casing, the impeller and the front panel are made of high-quality and durable UV-resistant plastic.
The specially designed aerodynamic profile of the mixed-flow impeller provides high air capacity and pressure combined with low-noise operation.

The fan is equipped with a specially designed backdraft damper to prevent back flow and heat losses during the fan standby.
The fan exhaust spigot incorporates specially designed air rectifiers to reduce air turbulence, noise level and boost air pressure.

MOTOR

CONTROL

Automatic control:

Control with the electronic control unit BU-1-60. The control unit is supplied separately.
Control with the turn-off delay timer T. The built-in turn-off delay timer enables operation of the fan within 2 up to 30 minutes after turning the fan off with a switch.
Control with the timer T1. After turning of the external switch the turn-on delay timer is activated for 10 seconds up to 2 minutes. The fan remains turned off. After the fan is turned off with the external switch the fan keeps running within 2 up to 30 minutes according to the settings of the turn-off delay timer.
Control with the timer and humidity sensor TH. If the indoor humidity exceeds the set humidity point adjustable from 60% to 90%, the fan switches automatically on and runs until the indoor humidity drops below the set humidity point. After that the fan continues running according to the timer settings and turns off.

Manual control:

Manual operation with a room light switch (not included in the delivery set).
Operation with a built-in pull cord switch V. Not applicable in case of the ceiling mounting.

MOUNTING FEATURES

Direct installation inside a ventilation shaft.
Flexible air ducts may be used in case of remote location of the ventilation shaft. The air duct is connected to the exhaust spigot with a fixing clamp.

MOUNTING EXAMPLE

Characteristics

Parameter	VENTS 100 Solid	VENTS 100 Solid L	VENTS 100 Solid T	VENTS 100 Solid TH	VENTS 100 Solid V	VENTS 100 Solid VTH	VENTS 100 Solid T L	VENTS 100 Solid TH L	Measurement unit
Voltage	220-240	220-240	220-240	220-240	220-240	220-240	220-240	220-240	V
Frequency	50	50	50	50	50	50	50	50	Hz
Power consumption	7.5	7.5	7.5	7.5	7.5	7.5	7.5	7.5	W
Air capacity	85	85	85	85	85	85	85	85	m³/h
Current	0.05	0.05	0.05	0.05	0.05	0.05	0.05	0.05	A
RPM	2000	2000	2000	2000	2000	2000	2000	2000	min^-1
Sound pressure level at 3 m	25	25	25	25	25	25	25	25	dBА
Weight	0.51	0.51	0.51	0.51	0.51	0.51	0.51	0.51	kg
Spigot size	100	100	100	100	100	100	100	100	mm
Design	axial	axial	axial	axial	axial	axial	axial	axial	-
IP Code	IP 44	IP 44	IP 44	IP 44	IP 44	IP 44	IP 44	IP 44	-
Type	exhaust	exhaust	exhaust	exhaust	exhaust	exhaust	exhaust	exhaust	-
Mounting	wall mounting, ceiling mounting	wall mounting, ceiling mounting	wall mounting, ceiling mounting	wall mounting, ceiling mounting	wall mounting, ceiling mounting	wall mounting, ceiling mounting	wall mounting, ceiling mounting	wall mounting, ceiling mounting	-

Capacity diagram

Operating point

Files archieve

Downloads

Modifications

Modification name	Humidity sensor	Timer	Pull-cord switch	Ball bearing motor
VENTS 100 Solid	-	-	-	-
VENTS 100 Solid L	-	-	-
VENTS 100 Solid T	-		-	-
VENTS 100 Solid TH			-	-
VENTS 100 Solid V	-	-		-
VENTS 100 Solid VTH				-
VENTS 100 Solid T L	-		-
VENTS 100 Solid TH L			-

Dimensions

Characteristics

Legend

PICTURE SYMBOL	DESIGNATION	MODIFICATION DESCRIPTION
	Solid L	Modification with a ball bearing motor for long service life (around 40 000 operating hours). Installation at any angle is possible. The ball bearings require no maintenance and are greased for the entire service life.
	Solid T	Modification with a regulated turn-on delay timer.
	Solid T1	Modification with a turn-on delay timer regulated from 10 seconds to 2 minutes and a turn-off delay timer regulated from 2 up to 30 minutes.
	Solid TH	Modification with a turn-off delay timer regulated from 2 up to 30 minutes and a humidity sensor regulated from 60% up to 90%.
	Solid V	Modification with a pull-cord switch.
	Solid VT	Modification with a pull-cord switch and a turn-off delay timer regulated from 2 up to 30 minutes.
	Solid VTH	Modification with a pull cord switch, turn-off delay timer regulated from 2 up to 30 minutes and a humidity sensor regulated from 60% up to 90%.