VENTS MICRA 100 WiFi

Print version Save in PDF format

Air flow up to 100 m³/h.

Add to project

Add to compare

3D model

Gallery

Description
Characteristics
Capacity diagram
Downloads
Dimensions
Dimensions
Ecodesign
Accessories
Video

Description

FEATURES

Efficient solution for supply and exhaust ventilation of separate spaces.
Electric pre-heater or re-heater modification available for cold climate conditions.
Heat exchanger with an enthalpy membrane modification available for humid and hot climate conditions.
Low-energy ЕС fans.
Supply air purification ensured with two built-in G4 and F8 filters (optional H13, F8 Carbon).

Excellent noise control (25-38 dBA).
Upgradeable with an exhaust duct to provide air extraction from the bathroom.
Easy installation.
Compact size.
Modern design.
Control with the mobile application Android / IOS.

DESIGN

CASING

FANS

Polymer coated metal casing decorated with an acrylic front panel. Thanks to the modern design the unit can seamlessly blend with most interior design. Heat and sound insulation is provided with 10 mm cellular synthetic rubber layer. The front panel ensures convenient access for filter maintenance and has a lock for extra security. The unit has two ø 100 mm inlet and outlet spigots for fresh air intake and stale air extraction outside. The third ø 100 mm spigot (included) can be additionally fitted to the unit to connect an exhaust air duct from the bathroom.

The units feature efficient electronically commutated (ЕС) motors with external rotor and impellers with forward curved blades. The state-of-the-art motor design offers the very best energy efficiency performance. EC motors are distinguished with high performance and totally controllable speed range. In addition to that the efficiency of electronically commutated motors reaches very impressive levels of up to 90 %.

AIR DAMPERS

NE MICRA 100 HEATER FOR CONDENSATE FREEZING PROTECTION (OPTIONAL)

The unit is equipped with supply and exhaust air dampers, which activate automatically to prevent drafts while the unit is off.

Operation in a cold climate may result in condensate freezing in the exhaust air duct and the external hood. Therefore, it is recommended to install the NE MICRA 100 heater (purchased separately) to prevent icing.

AIR FILTRATION

PRE-HEATING

G4 and F8 panel filters provide supply air filtration (PM2.5 > 75 %). To meet more stringent air purity requirements a F8 filter can be replaced with an H13 (PM2.5 > 95 %) or F8 Carbon (purchased separately).
G4 panel filter provides extract air filtration.

MICRA 100 E WiFi, MICRA 100 E2 WiFi units are equipped with an electric pre-heater for freeze protection of the heat exchanger.

RE-HEATING

MICRA 100 E1 WiFi, MICRA 100 E2 WiFi units feature an electric re-heater to raise the supply air temperature as necessary.

HEAT EXCHANGER

MICRA 100 WiFi units are equipped with a counter-flow heat exchanger with a polystyrene core.
In the cold season the extract air heat is captured and transferred to the supply air stream, which reduces the ventilation-generated heat losses. However, this process may be associated with condensation, which is collected in a special drain pan and evacuated outside via the exhaust air duct.
In the warm season the ambient air heat is transferred to the exhaust air stream. This allows for a considerable reduction of the supply air temperature, which reduces operation load for the air conditioners.

MICRA 100 ERV WiFi units are equipped with a counter-flow heat exchanger with an enthalpy membrane.
In the cold season the extract air heat and moisture are transferred to the supply air stream through the enthalpy membrane reducing the heat losses from ventilation.
Consequently, the heat and moisture of the ambient air is transferred to the exhaust air stream through the enthalpy membrane in the warm season. This allows for a considerable reduction of the supply air temperature and humidity, which reduces operation load for the air conditioners.

FUNCTIONING

CONTROL PANEL

CONTROL

The unit is equipped with a control panel
The remote control is supplied as standard
Wi-Fi communication
Controlled by Android or iOS smartphone or tablet

1. Turning unit on/off
2. Speed selection
3. Increasing temperature set point for the re-heater (available for the models with a re-heater)
4. Turning re-heater on/off (available for the models with a re-heater)
5. Decreasing temperature set point for the re-heater (available for the models with a re-heater)
6. Turning timer on/off
7. Activation/deactivation of the scheduled operation mode

FUNCTIONS


	VENTS MICRA app is available at Google Play Market and App Store

Speed changeover
Filter replacement indication
Alarm indication
Speed setting
Timer
Weekly schedule

FREEZE PROTECTION

MICRA 100 (ERV) WiFi features an exhaust air temperature sensor downstream of the heat exchanger, which disables the supply fan to let the warm extract air warm up the heat exchanger. After that the supply fan turns on and the unit reverts to the normal operation mode.
Overheating protection for MICRA 100 E WiFi and MICRA 100 E2 WiFi is implemented with a pre-heater.

Following functions are available:

	MICRA 100 WiFi MICRA 100 E WiFi	MICRA 100 E1 WiFi MICRA 100 E2 WiFi
Speed selection	+	+
Filter replacement indication	+	+
Alarm indication	+	+
Speed setup	+	+
Timer	+	+
Week scheduler	+	+
Re-heater enabled/disabled	-	+
Supply air temperature setup	-	+
Control with the mobile application VENTS MICRA Android / IOS	+	+

MOUNTING EXAMPLE

Each space requiring ventilation is equipped with one or several MICRA 100 WiFi units.
A single unit is capable to ensure efficient ventilation in spaces with floor area up to 100 m².

MICRA 100 WiFi units can be upgraded with a bathroom exhaust air duct. To enable such a configuration the units can be additionally equipped with the optional ø 100 mm spigot (supplied as standard).

MICRA 100 WiFi deployment in a compact residential space

MICRA 100 WiFi mounting example in the office

Characteristics

Parameter	MICRA 100 WiFi 1 speed	MICRA 100 WiFi 2 speed	MICRA 100 WiFi 3 speed	MICRA 100 WiFi 4 speed	MICRA 100 WiFi 5 speed	Measurement unit
Speed	1	2	3	4	5	-
Phase	1	1	1	1	1	˜
Voltage	110-240	110-240	110-240	110-240	110-240	V
Maximum unit power without an electric heater	20	23	29	37	53	W
Max. unit current without electric heater	0.4	0.4	0.4	0.4	0.4	A
Electric preheater power	-	-	-	-	-	W
Electric reheater power	-	-	-	-	-	W
Max. unit current with electric heater	-	-	-	-	-	A
Frequency	50/60	50/60	50/60	50/60	50/60	Hz
Maximum air capacity	30	44	60	75	100	m³/h
Air capacity	30	44	60	75	100	m³/h
RPM	2200	2200	2200	2200	2200	min^-1
Heat recovery efficiency	96	94	92	89	87	%
Sound pressure level at 3 m distance	13	20	27	33	39	dBА
Functions	Wi-Fi, Filter replacement indication, Timer, Weekly schedule	Wi-Fi, Filter replacement indication, Timer, Weekly schedule	Wi-Fi, Filter replacement indication, Timer, Weekly schedule	Wi-Fi, Filter replacement indication, Timer, Weekly schedule	Wi-Fi, Filter replacement indication, Timer, Weekly schedule	-
Casing material	polymer coated steel	polymer coated steel	polymer coated steel	polymer coated steel	polymer coated steel	-
Heating	without heating	without heating	without heating	without heating	without heating	-
Remote control panel	Sensor Wi-Fi	Sensor Wi-Fi	Sensor Wi-Fi	Sensor Wi-Fi	Sensor Wi-Fi	-
Insulation	10 mm	10 mm	10 mm	10 mm	10 mm	-
Filter: extract	G4	G4	G4	G4	G4	-
Filter: supply	G4, F8, * F8 Carbon; H13	G4, F8, * F8 Carbon; H13	G4, F8, * F8 Carbon; H13	G4, F8, * F8 Carbon; H13	G4, F8, * F8 Carbon; H13	-
Weight	31	31	31	31	31	kg
Heat exchanger material	polystyrene	polystyrene	polystyrene	polystyrene	polystyrene	-
Heat exchanger type	counter-flow	counter-flow	counter-flow	counter-flow	counter-flow	-
Duct	100	100	100	100	100	-
Type	supply and exhaust	supply and exhaust	supply and exhaust	supply and exhaust	supply and exhaust	-
SEC Class	A	A	A	A	A	-
Option*						-

Capacity diagram

Selection method:
Air flow:
Pressure:

Operating point

Air flow: --
Pressure: ---

Files archieve

Downloads

Dimensions

Characteristics

Parameter	Value	Measurement unit

Dimensions

Ecodesign

Trade mark	VENTS
Model	MICRA 100 WiFi
Specific energy consumption (SEC), kWh/ (m².a)	Cold		Average		Warm
	-79.4	А+	-39.7	А	-14.3	Е
Type of ventilation unit	Bidirectional
Type of drive installed	Variable speed
Type of heat recovery system	Recuperative
Thermal efficiency of heat recovery, %	92
Maximum flow rate, m³/h	100
Electric power input, W	53
Sound power level, dB(A)	47
Reference flow rate, m³/s	0.017
Reference pressure difference, Pa	N/A
Specific power input (SPI), W/(m³/h)	0.483
Control typology	Local demand control
Maximum internal leakage rates, %	0.1
Maximum external leakage rates, %	0.9
Mixing rate of bidirectional units, %	20
Airflow sensitivity at +20 Pa and -20 Pa	0.93
The indoor/outdoor air tightness, m³/h	7
Internet address	www.ventilation-system.com
Annual electricity consumption (AEC), kWh electricity/a	Cold		Average		Warm
	863		326		281
Annual heating saved (AHS), kWh primary energy/a	Cold		Average		Warm
	9230		4718		2133

Accessories

Name	Picture	Description
MK Micra 100 white		Mounting kit: Two plastic Ø 100 mm air ducts 500 mm long; Outdoor box (white); Cardboard template
MK Micra 100 chrome		Mounting kit: Two plastic Ø 100 mm air ducts 500 mm long; Outdoor box made of hairline stainless steel; Cardboard template
NB Micra 100 white		Outdoor box (white)
NB Micra 100 chrome		Hairline stainless steel outdoor box
NE Micra 100		Heater to prevent condensate freezing in the drain pipe and the outdoor box
SF 193x158x18 G4 PPI		G4 filter
SF 193x158x47 F8		F8 filter
SF 193x158x47 F8 C		F8 carbon filter
SF 193x158x47 H13		H13 HEPA filter
HR-S		HR-S humidity sensor
CO2-1		СО₂ sensor with air quality indication and On/Off button
CO2-2		CO₂ sensor

Video