Vents VVR 180

Print version Save in PDF format

Maximum capacity - 212 m³/h.

Add to project

Add to compare

Description
Characteristics
Downloads
Dimensions
Wiring plan
Additional diagrams

Description

APPLICATIONS
Continuous or periodic exhaust ventilation of bathroom, showers, kitchens and other utility spaces.	For mounting in windows.
DESIGN
Modern design and aesthetic look. The casing and the impeller are made of high-quality durable ABS plastic, UV resistant. The intellectual impeller design makes the fan efficiency high and the service life long.	The fan and motor are specially designed for silent operation. Equipped with automatic louver shutter for air back flow prevention. Protection rating IP 24.
MOTOR
Reliable and low-watt electric motor. Designed for continuous operation and requires no maintenance.	Equipped with overheating protection. VVR series fans are equipped with a reversing motor for combination of air exhaust and air supply functions.
CONTROL
Manual: The fan is controlled by a room light switch. It is not included in the delivery package. Speed control is possible through a thyristor speed controller (see Electrical Accessories). Several fans may connected to the same controller. Speed controllers can not be connected to the fans with T, TH, TP, VT, VTH modification.	Automatic: By the electronic control unit BU-1-60 (see Electrical Accessories). The control unit is supplied separately.
MOUNTING FEATURES
The fan is mounted directly into the window opening.
MOUNTING EXAMPLE

Characteristics

Parameter	Vents VVR 180 exhaust	Vents VVR 180 supply	Measurement unit
Voltage	220-240	220-240	V
Frequency	50/60	50/60	Hz
Power consumption	25	25	W
Air capacity	212	176	m³/h
Current	0.1	0.1	A
RPM	1400	1400	min^-1
Sound pressure level at 3 m	31	31	dBА
Weight	1.6	1.6	kg
Spigot size	180	180	mm
Engine Type	220-240V / 50-60Hz	220-240V / 50-60Hz	-
Design	axial	axial	-
Duct diameter	180	180	mm
IP Code	IP 24	IP 24	-
Type	exhaust	exhaust	-
Mounting	Window mounting	Window mounting	-

Files archieve

Downloads

Dimensions

Characteristics

Parameter	Value	Measurement unit
A	230	mm
B	65	mm
D	177	mm
C	87	mm

Wiring plan

Wiring diagram for the fans equipped with a built-in switch	Wiring diagram for the fans without built-in switch

Wiring diagram for the fans equipped with a timer / timer, humidity sensor and a built-in switch	Wiring diagram for the fans equipped with a timer / timer with a humidity sensor without built-in switch

Wiring diagram for the fans with a light lamp. Separate activation of the fan and the built-in lamp.	Wiring diagram for the fans with a light lamp. Parallel activation of the fan and the built-in lamp.

Wiring diagram for the fans with an light lamp and grounding. Separate activation of the fan and the built-in lamp.	Wiring diagram for the fans with a light lamp and grounding. Parallel switching of the fan and the built-in lamp.

Wiring diagram for the fans with grounding

* - only for fans designed for 12 V rated voltage (specified on the fan casing and packing).
S, S1, S2 - external switches.

Operating logic of the fans with optional equipment

The fan equipped with a timer is activated by the control voltage supplied to LT input. After the control voltage is disconnected the fan continues operating within the time period within 2 to 30 minutes according to the timer settings. The turn-off delay time is adjusted by turning the respective potentiometer T control knob clockwise to increase and counter-clockwise to reduce it.
The fan equipped with a timer and humidity sensor is activated by the control voltage supplied to LT input or in case of exceeding the preset humidity threshold value adjustable from ~60% to ~90%. After the control voltage is disconnected or as the humidity level H drops below the set threshold the fan continues operating within the time period within 2 to 30 minutes according to the timer settings. The turn-off delay time and the threshold humidity level are adjusted by turning the control knob of the respective potentiometer T for timer and H for humidity sensor clockwise to increase and counter-clockwise to reduce the set value. To set the maximum humidity level (90%) set the potentiometer control knob for H max position.
The fan equipped with a timer and motion sensor is activated in case of the moving detection at the distance from 1 m to 4 m with 100° detection angle. After motion is off the fan continues operating within the time period within 2 to 30 minutes according to the timer settings. The turn-off delay time is adjusted by turning the respective potentiometer T control knob clockwise to increase and counter-clockwise to reduce it.
Wiring diagram for connection of the light lamp to the fan timer operated by the common switch is shown on diagram 4. Upon the light lamp disconnection the fan continues operating according to the timer setting within the set time period.

Additional diagrams

1 - air supply
2 - air exhaust