Login

Privacy Policy (GDPR)
Authorization
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Product consultation from our experts - Online
Registration
Signup
By using this form, you confirm that you have read the site terms of use Terms of use and completely accept the terms of use

VENTS VPA 250-6,0-3


Supply unit with the air flow up to 990 m³/h in the compact sound- and heat-insulated casing with electric heater.

  • Description
  • Characteristics
  • Capacity diagram
  • Downloads
  • Dimensions
  • Additional characteristics
  • Designation key
  • Accessories
Description
Description
DESCRIPTION CASING
  • The fan unit provides filtration, heating and supply of fresh air to premises with the air flow from 200 up to 1500 m³/h.
  • The casing is made of aluzinc with internal heat- and sound-insulating 25 mm layer of mineral wool.
FILTER HEATER
  • Integrated panel G4 filter ensures sufficient supply air purification.
  • Electric heating battery is designed for supply air heating during winter and off-season time.
FAN
  • Centrifugal fan with backward curved blades and built-in overheating thermostat with automatic restart.
  • The motor ball bearings are maintenance-free and are designed for at least 40 000 hours service life.
CONTROL AND AUTOMATION
  • Integrated control and automation system for air flow control and setting supply air temperature.
  • The unit may be controlled from the external control panel fixed on 10 m wire delivered as a standard.
CONTROL AND PROTECTION FUNCTIONS
  • switching the unit on/off;
  • maintaining supply air temperature set from the control panel by means of triac heating capacity regulation;
  • fan speed control by means of the control panel (3 speed modes);
  • working-out of the required patterns during the unit switching on and off;
  • the unit daily or week timer operation;
  • active overheating protection of heating elements;
  • disabling electric air heating battery operation when the motor is not running;
  • electric heater overheating protection by means of two thermostats;
  • filter clogging control though the differential pressure sensor;
  • actuating the air damper;
  • relay input from an external sensor (humidistat, CO2 sensor, motion sensor) to switch the fan to maximum speed;
  • input for alarm fire fighting signal.
MOUNTING
  • Air supply unit can be mounted on the floor, attached to a ceiling with a seat angle with anti-vibration mounts or attached to a wall by means of the brackets.
  • The unit can be mounted either in service spaces (balcony, storage room, underground floor, roof space etc.) or in the main space by placing the unit above the suspended ceiling or in the pocket.
  • The unit can be mounted in any position except for the vertical one with vertical air downstream because tubular heating elements are not allowed under the fan.
  • Free access to the unit shall be provided for maintenance and filter cleaning.
  • The service panel is placed on the top.
  • The control block is on the right.
Characteristics
Characteristics
Parameter VPA 250-6,0-3
Measurement unit
Frequency 50 Hz
Phase 3 ˜
Voltage 400 V
Fan current 0.85 A
Maximum fan power 194 W
Electric heater power 6000 W
Electric heater current 8.7 A
Air capacity 990 m³/h
Total unit power 6194 W
Total unit current 9.55 A
Number of electrical heating elements 3 -
RPM 2790 min-1
Duct diameter 250 mm
Transported air temperature -25 ... +40 °С
Sound pressure level at 3 m distance 30 dBА
Heating electric heating -
Casing material aluzinc -
Filter G4 -
Insulation 25 mm mineral wool -
Connected air duct size 250 mm
Weight 52 kg
Duct for round air ducts -
Capacity diagram
Capacity diagram
  • Selection method:
  • Air flow:
  • Pressure:
Operating point
  • Air flow: --
  • Pressure: ---
Files archieve
Downloads
Select document type
  • Advertising and printing products
  • Certificates
  • Technical documentation
Name
Certificate GS "VPA (230V)" (pdf 181.99Kb)
"VENTS VPA" product description 01-2023 (pdf 1.75Mb)
Download high quality image "VENTS VPA (ErP 2016, 2018)" (psd 1.6Mb)
Declaration of сonformity "VPA" (pdf 1.55Mb)
"VENTS VPA" user's manual 10-2016 (V29EN-03) (pdf 627.4Kb)
“VENTS VPA with control system” user's manual 10-2016 (V29-1_EN-03) (pdf 2.41Mb)
Certificate GS "VPA (3-400V)" (pdf 193.74Kb)
Certificate LVD "VPA (230V)" (pdf 231.35Kb)
Certificate LVD "VPA (3-400V)" (pdf 237.69Kb)
Download image "VENTS VPA (ErP 2016, 2018)" for your website (png 339.45Kb)
“Control Panel SYNERGY А16” user's manual 02-2016 (V131EN-01) (pdf 2.29Mb)
Dimensions
Characteristics
VENTS VPA 250-6,0-3
Parameter Value Measurement unit
∅D 249 mm
B 487 mm
B1 526.5 mm
H 513 mm
L 835 mm
L1 684 mm
Additional characteristics
Additional characteristics
Sound-power level Gen Octave-frequency band [Hz]
63 125 250 500 1000 2000 4000 8000
LWA to inlet dBA 65 41 54 61 58 63 62 55 43
LWA to outlet dBA 72 42 55 63 63 68 70 60 45
LWA to environment dBA 45 15 30 44 39 37 28 23 6
Designation key
Designation key
Series Air duct diameter   Electric heater power [kW]   Phase Integrated control system
VENTS VPA 1: high-powered motor 100; 125; 150; 200; 250; 315 1.8; 2.4; 3.4; 3.6; 5.1; 6; 9 1: single phase
3:three phase
LCD: integrated automation with A16 control panel
Accessories
Accessories
Type Replaceable filter Filter type
VPA 100-1,8-1 SF 335x322x70 G4 panel filter
VPA 125-2,4-1
VPA 150-2,4-1 SF 397x364x70 G4 panel filter
VPA 150-3,4-1
VPA 150-5,1-3
VPA 150-6,0-3
VPA 200-3,4-1 SF 439x428x70 G4 panel filter
VPA 200-5,1-3
VPA 200-6,0-3
VPA 250-3,6-3
VPA 250-6,0-3
VPA 250-9,0-3
VPA 315-6,0-3 SF 475x470x70 G4 panel filter
VPA 315-9,0-3
VPA-1 315-6,0-3
VPA-1 315-9,0-3
Share your opinion

Questionnaire
Basic parameter for domestic fan selection