VENTS VUE 250 H mini

Description
Characteristics
Capacity diagram
Downloads
Dimensions
Designation key
Accessories

Description

DESCRIPTION	CASING
The air handling units are the fully-featured ventilation units that ensure air filtration, fresh air supply and stale air extract. During the operation process the extract air heat is transferred to the supply air through the plate heat exchanger.	The casing of the unit is made of aluzinc steel, internally filled with 20 mm mineral wool heat- and sound-insulating layer.
MODIFICATIONS
VUT 250 H mini A12: models with horizontal duct connections, fans with AC motors with polystyrene heat exchanger.	VUE 250 H mini A12: models with horizontal duct connections, fans with AC motors with a heat exchanger made of enthalpy.
FILTER	FANS
Two built-in filters with filtering class G4 provide efficient supply and extract air filtration. F8 filter is available as an option for supply air filtration.	The unit is equipped with a supply and exhaust centrifugal fan with backward curved blades and integrated overheating protection thermostat with automatic restart. The motors and the impellers are dynamically balanced.

HEAT EXCHANGER
VUT mini: plate heat exchanger made of polystyrene. Whenever heat recovery is not required for unit operation, the heat exchanger block can be easily replaced by a summer block. To prevent the heat exchanger freezing, electronic protection system is applied. It switches the supply fan off as the temperature sensor requires.	VUE mini: plate heat exchanger made of enthalpy with heat recovery efficiency up to 78 %. The applied heat exchanger enables not only heat but also humidity recovery, which helps maintaining a comfortable humidity level. To prevent the heat exchanger freezing, electronic protection system is applied. It switches the supply fan off as the temperature sensor requires.

CONTROL	INSTALLATION
The unit is equipped with the A12 (SRS-1) control panel. Speed and rotation control of the single-phase power-controlled motors allows turning the unit on/off and controlling its capacity.	Mounting to wall, floor or ceiling with fixing brackets. While mounting provide free access to the service panel for filter replacement and servicing. The correct mounted unit must provide condensate collecting and drainage.

Characteristics

Parameter	VUE 250 H mini	Measurement unit
Frequency	50/60	Hz
Phase	1	˜
Voltage	230	V
Maximum unit power	126	W
Maximum unit current	0.6	A
Sound pressure level at 3 m distance	28-47	dBА
Air capacity	260	m³/h
RPM	2700	min^-1
Humidity recovery efficiency	27...45	%
Transported air temperature	-25 ... +40	°С
Heat recovery efficiency	52...73	%
Casing material	aluzinc	-
Insulation	20 mm mineral wool	-
Filter: extract	G4	-
Filter: supply	G4, * F8 PM2.5 81 %	-
Heat exchanger type	cross-flow	-
Heat exchanger material	enthalpy	-
Duct	for round air ducts	-
Connection diameter	125	mm
Mounting	floor mounting, wall mounting, ceiling mounting	-
Option*		-

Capacity diagram

Selection method:
Air flow:
Pressure:

Operating point

Air flow: --
Pressure: ---

Files archieve

Downloads

Dimensions

Characteristics

Parameter	Value	Measurement unit
∅D	125	mm
B	300	mm
H	443	mm
H1	43	mm
L	713	mm
L1	810	mm

Designation key

Series	Rated air flow [m³/h]	Spigot modification	Model	Casing colour	Integrated automation system
VUT: ventilation with heat recovery VUE: ventilation with energy recovery	250	H: horizontal	mini	_: aluzinc White: white painted	А12: control panel (SRS-1)

Accessories

Model	G4 panel filter	F8 panel filter	Silencers		Back valves	Air dampers	Clamps	Summer blocks

VUT 250 H mini A12	SF 240x184x40 G4	SF 240x184x40 F8	SR 125	SRF 125	KOM 125	KR 125	C 125	VL C4 200/240
VUE 250 H mini A12