Ceiling bathroom fans VENTS CBF LP series

• Two-speed AC motor with overheating protection.
• Low noise level.
• Modular design enables easy connection of a humidity or motion sensor.

• Continuous or periodic exhaust ventilation of bathrooms, showers, and other utility spaces.
• Designed for high-resistant ductworks.
• Ingress protection rating: IPX4.
• Compatible with Ø 100 mm air ducts.

• The CBF LP fan features a reliable asynchronous two-speed motor with overheating protection.

• Maintenance-free bearings contain enough grease for 40 000 hrs of continuous operation.

• The casing is made of galvanized steel.
• The modular design enables easy retrofitting with the optional humidity and motion sensors (except for the basic model) or the grille with a light.
• The centrifugal impeller is equipped with forward curved blades for high operating pressure and low noise.
• The impeller of the motor is made of high-quality durable ABS plastic.
• The fans feature a gravity damper to prevent backdraft.

• Easily removable plastic grille ensures easy installation and maintenance of the fan.
• The modular grille design enables easy connection of an optional humidity or motion sensor.

• CBF LP: basic model with a two-speed motor.
• The CBF LP T unit is equipped with an adjustable turn-on and turn-off delay timer. A humidity sensor or a motion sensor (available separately) can be optionally connected to this fan modification.

The built-in control panel of the CBF LP T fans enables setup of the following parameters:

• timer-based turn-on delay
• timer-based turn-off delay
• humidity level
• air flow in Modes 1 and 2.

Control panel for CBF LP fans

Manual control

The fan is controlled by means of the P2-10 speed switch (available separately).

Automatic control

• Timer: the fan constantly operates in Mode 1. When the light switch is closed, the fan switches to Mode 2 after the end of the turn-on delay time (from 0 to 3 minutes). Upon the light switch opening, the built-in turn-off delay timer keeps the fan running in Mode 2 from 1 to 90 minutes. On elapsing of this period the fan reverts to Mode 1. Timer and humidity sensor (available separately): the fan constantly operates in Mode 1.
• If the indoor humidity level exceeds the sensor threshold value set in the 50-90 % range, the fan switches to Mode 2. When the humidity level reverts to the pre-set value, the built-in turn-off delay timer keeps the fan running in Mode 2 from 1 to 90 minutes. On elapsing of this period the fan reverts to Mode 1. Timer and motion sensor (available separately): the fan constantly operates in Mode 1.
• If the motion sensor detects movement within its range, the fan goes to Mode 2. When the movement is no longer detected, the built-in turn-off delay timer keeps the fan running in Mode 2 from 1 to 90 minutes. On elapsing of this period the fan reverts to Mode 1.

• The fan is designed for ceiling mounting.
• The fan is attached to the ceiling joists with spacer brackets and self-tapping screws.
• The flexible air duct is connected to the fan exhaust spigot through a clamp.
• The reduced casing height allows fans to be installed in ceilings with a thickness of minimum 140 mm.