VENTS CBR 3000

The clamps are designed for quick and reliable mounting and connection of various round ventilation system components. The clamps facilitate the installation and removal of fans for maintenance and cleaning.

CBR 3000 series clamps are the band clamps in a plastic covering (roll 30 m x 9 mm x 0,8 mm). Locking devises set SU 50 (50 pcs) is supplied separately. Using a band of the worm drive clip of the required length and locking device you can have the required diameter clamp. The clamps are tightened with screws. Tin snips are everything you need to have the required length clamp as the plastic casing has a special design and marking.

1. Bend the clamp edge;
2. Fix the bent edge of the band into the band holder;
3. Turn the band holder till the mark of the required diameter on the casing;
4. Cut the band away as applicable for the casing;
5. Fix the locking device on the clamp.