Login

Privacy Policy (GDPR)
I forgot my password
Authorization
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Product consultation from our experts - Online
Registration
Signup
By using this form, you confirm that you have read the site terms of use Terms of use and completely accept the terms of use
Authorization
Menu
    Signup & Login
    EN
    About us

    VENTS 100 MF 12

    VENTS 100 MF 12
    • VENTS 100 MF 12
    zoom
    • VENTS 100 MF 12
    Print versionSave in PDF format
    Maximum capacity - 85 m³/h.
    Add to project
    Add to compare
    • Description
    • Characteristics
    • Capacity diagram
    • Downloads
    • Dimensions
    • Designation key
    Description
    Description
    APPLICATIONS  
    • Continuous or periodic exhaust ventilation of bathroom, showers, kitchens and other utility spaces.
    • Ventilation of premises with high noise level limitations.
    • Mounting into ventilation shafts or connection to Ø100, 125 and 150 mm air ducts.   
    DESIGN  
    • The casing and the impeller are made of highquality durable ABS plastic, UV resistant.
    • Specially designed impeller aerodynamic profile provides high air capacity and low noise.
    • The fan is equipped with a back valve to prevent back flow and heat losses during the fan standby.
    • The fan exhaust spigot incorporates specially designed air rectifiers to reduce air turbulence, increase air pressure and lower noise level.
    MOTOR  
    • Low energy demand from 8 W due to new high-efficient motor.
    • Protection rating IP 44.
    • Designed for continuous operation and requires no maintenance.
    • Motor equipped with overheating protection.
    CONTROL  

    Manual control:

    • Manual control with a room light switch. The switch is not included into delivery set.
    • The fan is controlled by the built-in pull cord switch V. Not applied in case of ceiling mounting.
    • Speed control is possible through a thyristor\speed controller (see Electrical Accessories). Several fans may connected to the same controller. Speed controllers can not be connected to the fans with T, TH, TP, VT, VTH modification.

    Automatic:

    • By the electronic control unit BU-1-60. The control unit is supplied separately.
    • By the timer T (the built-in run-out timer enables the fan operation within 2 to 30 minutes after the fan switching off).
    • By the humidity sensor and timer TH (if the humidity level in the room exceeds the sensor threshold adjustable value within 60-90% the fan switches automatically on and operates until the humidity level drops to the standard level, after that the fan continues operating within the time period according to the timer setting, then shuts down).
    MOUNTING FEATURES  
    • The fan is mounted directly into the ventilation shaft.
    • Flexible duct application is recommended in case of remote location of the ventilation shaft.
    • The air duct is connected to the fan exhaust flange through a clamp.
    • Fixed to wall by self-tapping screws.
    • Suitable for ceiling mounting.
    MOUNTING EXAMPLE  
    Characteristics
    Characteristics
    Parameter VENTS 100 MF 12
    		 Measurement unit
    Current 1.02 A
    Voltage 12 V
    Frequency 50 Hz
    Power consumption 8 W
    Air capacity 85 m³/h
    RPM 2075 min-1
    Sound pressure level at 3 m 28 dBА
    Weight 0.45 kg
    Design axial -
    Duct diameter 100 mm
    IP Code IP 44 -
    Mounting wall mounting, ceiling mounting -
    Capacity diagram
    Capacity diagram
    • Selection method:
    • Air flow:
    • Pressure:
    Operating point
    • Air flow: --
    • Pressure: ---
    Files archieve
    Downloads
    Select document type
    • Advertising and printing products
    • Certificates
    • Technical documentation
    Name
    Download
    Show
    "VENTS MF" product description 01-2019 (pdf 3.23Mb)
    Download image "VENTS MF" for your website (png 431.42Kb)
    Download high quality image "VENTS MF" (psd 2.11Mb)
    "VENTS MF" user’s manual 10-2020 (V191EN-01) (pdf 1.78Mb)
    Dimensions
    Characteristics
    VENTS 100 MF 12
    Parameter Value Measurement unit
    ∅D 99 mm
    B 150 mm
    L 79 mm
    L1 19 mm
    Designation key
    Designation key
    PICTURE SYMBOL DESIGNATION MODIFICATION DESCRIPTION
    MF L The motor is equipped with bal bearings for long service life (appr. 40 thousand hours) and fan mounting at any angle. The bearings are maintenance-free and contain enough grease for the entire operating period.
    MF T Off-delay timer modification with operating time from 2 to 30 min.
    MF T1 Modification with turn-on delay timer (adjustable from 0 to 2 minutes) and off-delay timer (adjustable from 2 to 30 minutes).
    MF TH  Off-delay timer modification with the operating time from 2 to 30 min and humidity sensor with threshold from 60 to 90%.
    MF V pull-cord switch modification.
    MF VT Modification with pull-cord switch and off-delay timer with operating time from 2 to 30 min.
    MF VTH Modification with pullcord switch, offdelay timer with operating time from 2 to 30 min and humidity sensor with threshold from 60 to 90%.
    Similar products
    This site use cookies. By accepting cookies you can optimize your browsing experience. Please read our Privacy Policy for more information.
    Privacy Policy (GDPR)
    Close
    Share your opinion

    Questionnaire
    Is our site helpful for your business development?