Login

Not registered yet? Take advantages of registration:

Products saving in a binding to the projects

Product consultation from our experts - Online

Registration

Signup

Signup & Login

EN

VENTS VN-1 80 K

VENTS VN-1 80 K

Print version Save in PDF format

Maximum capacity - 150 m³/h.

Add to project

Add to compare

Description
Characteristics
Capacity diagram
Downloads
Dimensions
Options description

Description

Description

APPLICATION
Exhaust ventilation of high-rise residential and non-residential premises with increased fire prevention requirements.	Mounting in kitchens, bathrooms, toilets, storerooms and other household areas.
DESIGN
For wall surface mounting. The front panel and the casing are made of high-quality durable ABS plastic. Equipped with maintenance-free fireretarding damper. As the temperature in the shaft reaches 90°С the thermal fuse melts and the damper shuts automatically hot air access off, and the flame and smoke ingress to the room though the ventilation shaft system is prevented.	For easy mounting the damper is mounted on a pivot rod. First mount the damper to the wall and then fix the fan casing (see mounting examples). The fire-retarding damper serves as a backdraft damper when the fan is off and prevents air moving from the ventilation shaft. Connected with the main ventilation shaft with a flexible air duct. Connecting branch pipe diameter 80 mm.
MOTOR
Energy-efficient 2-speed motor on ball bearings with minimum energy demand. Independent maintenance of pressure and air flow rate in the duct.	For precise characteristics, low noise level and safe operation each turbine is dynamically balanced while assembly.
MODIFICATIONS AND OPTIONS
VN-1A(E) 80 K T — the fans are equipped with a timer. VN-1A(E) 80 K TR — the fans are equipped with an adjustable timer.	VN-1A(E) 80 K I — the fans are equipped with an interval switch. VN-1A(E) 80 K H — the fans are equipped with a humidity sensor.
CONTROL
Speed switch is performed with the external manual switch. P3-1-300 speed switch for the three speed fan models and P2-1-300 for the two speed fan models. The speed switches are not included into the delivery set and are available upon order.
MOUNTING EXAMPLE

Characteristics

Characteristics

Parameter	VENTS VN-1 80 K speed 1	VENTS VN-1 80 K speed 2	VENTS VN-1 80 K speed 3	Measurement unit
Engine Type	220В / 50Гц	220В / 50Гц	220В / 50Гц	-
Voltage	220-240	220-240	220-240	V
Frequency	50	50	50	Hz
Power consumption	17	27	48	W
Air capacity	63	102	150	m³/h
Current	0.14	0.18	0.21	A
RPM	1350	1830	2640	min^-1
Sound pressure level at 3 m	30	35.2	43.7	dBА
Maximum transported air temperature	50	50	50	°С
Electric connection	4×1.5	4×1.5	4×1.5	mm²
Spigot size	80	80	80	mm
Design	centrifugal	centrifugal	centrifugal	-
Duct diameter	80	80	80	mm
IP Code	IP 55	IP 55	IP 55	-
Type	exhaust	exhaust	exhaust	-
Mounting	wall mounting, ceiling mounting	wall mounting, ceiling mounting	wall mounting, ceiling mounting	-

Capacity diagram

Capacity diagram

Selection method:
Air flow:
Pressure:

Operating point

Air flow: --
Pressure: ---

Files archieve

Downloads

Dimensions

Characteristics

VENTS VN-1 80 K

Parameter	Value	Measurement unit

Options description

Options description

Name	Description
T timer modification	The fan is switched on to the maximum speed manually with the external switch, turn-on delay time is 50 seconds. The return to default position is performed with the timer, run-out time is 6 minutes. Continuous low speed operation is possible.
TR adjustable timer modification	The fan can be switched to the maximum speed manually with the external switch. Turn-on delay time is set with the internal regulator ranging from 0 to 150 seconds. Run-out time is set with the internal regulator from 2 to 30 minutes. Continuous low speed operation is possible.
I interval switch modification	The fan switches periodically to the maximum speed while operation. The switching interval is set by means of the internal regulator ranging between 0.5 and 15 hours. Run-out time is 10 minutes. The fan can be switched manually with the external switch, turn-on delay time is 50 seconds. Continuous low speed operation is possible.
H humidity sensor modification	The fan switches to the maximum speed as relative humidity level in the room increases. It switches off as relative humidity level drops by 10 % below the set level. The humidity threshold is adjusted in the range between 60 % and 90 %. Force switching to the maximum speed is provided, in this case the turn-on delay time is 50 seconds, and the run-out time is set by the internal regulator between 2 and 30 minutes. Continuous low speed operation is possible.

Accessories

VENTS Switch P...-1-300 More

VENTS Switch P...-1-300

VENTS Switch P...-1-300 More

TO COMPLETE THE REGISTRATION CLICK ON THE LINK SENT YOU BY EMAIL you have a new mail

you have a new mail

Your registration has been successfully completed. Enter your details in the login form in the Personal Area. you have a new mail confirm

you have a new mail confirm

Your message
was successfully sent

Check your inbox for further instructions

Questionnaire

How often do you use equipment selection program?