Centrifugal roof fan VENTS VKV 6D 500 - official VENTS website

Description

APPLICATION

DESIGN

The fan casing is made of steel with polymeric coating (VENTS VKV models), aluminum (VENTS VKVA), galvanized steel (VENTS VKVz).

MOTOR

2-, 4- or 6-pole single- or three-phase asynchronous motors with an external rotor and impeller with backward curved blades.
The motor is equipped with thermal overheating protection with automatic restart as well as ball bearings for long service life.
For precise features, safe operation and low noise, each turbine is dynamically balanced while assembly.
Motors protection rating IP44, IP54.

SPEED CONTROL

Both smooth or step speed control is performed by means of the thyristor or autotransformer controller.
Several fans can be connected to one controller in case the total power and operating current do not exceed the rated controller values.

MOUNTING

The fan is mounted on the roof directly above the ventilating duct or shaft and is firmly fixed to the flat surface by means of a connecting plate.
Electrical connection and installation shall beperformed in compliance with the manual and circuit diagram on the terminal box.
For connection of the fans to round air ducts use the following accessories: KKV damper, GVK flexible connector, FKV counter flange.
For mounting of the fans to flat surface use the mounting frame RKV.

Characteristics

Parameter	VKV 6D 500 50 Hz	VKV 6D 500 60 Hz	Measurement unit
Frequency	50	60	Hz
Phase	3	3	˜
Power	440	599	W
Voltage	400	400	V
A	1.23	1.32	A
Air capacity	6000	6122	m³/h
RPM	978	1125	min^-1
EC motor	no	no	-
Noise level at 3 m	52	54	dBА
Design	centrifugal	centrifugal	-
Motor protection rating	IP54	IP54	-
Transported air temperature	-25 ... +60	-25 ... +60	°С
IP Code	IP X4	IP X4	-
Number of poles	6	6	-
Weight	52	52	kg
Outdoor mounting	yes	yes	-
Sound-insulated casing	no	no	-
Type	exhaust	exhaust	-
Mounting	for roof	for roof	-

Capacity diagram

Operating point

Files archieve

Downloads

Dimensions

Characteristics

Additional characteristics

Designation key

Series and modification	Casing material	Motor modification		Turbine standard size
		Number of poles	Phase
VENTS VKV: vertical air exhaust	_: steel with polymeric coating А: aluminum z: galvanized steel	2 4 6	Е: single-phase D: three-phase	190; 220; 225; 250; 280; 310; 355; 400; 450; 500; 560; 630; 710