Panel filters FB K2, FB K2 ES - official VENTS website

Description
Modifications
Capacity diagram
Downloads
Designation key
Accessories

Description

APPLICATION
Filters are designed for use in supply ventilation and conditioning systems requiring high level of air purification.	Designed for connection to ø100, 125, 150 and 200 mm round air ducts.
DESIGN
Corrosion resistant casing made of polymer coated steel.	Convenient access for filter replacement.
MOUNTING
The compact design offers the ideal mounting solutions for limited mounting space, including suspended ceiling mounting.	Wall or ceiling mounting is performed by means of the supplied mounting brackets. Filters can be installed in any position.
AIR FILTRATION
The casing incorporates a service panel for quick access to the filters. Prefiltering with a G4 filter. Secondary filtering with an F8 filter or H13 HEPA filter. F8 filter delays up to 98 % of solid particles with a diameter of 2.5 microns. H13 filter delays up to 99 % of solid particles with a diameter of 2.5 microns, as well as fluff and bacteria. For additional removal of unwanted odours and gases, it is possible to install a carbon filter. Fine filtration with an electrostatic filter (ES modification).
ELECTROSTATIC FILTER	The filter cleaning interval depends on the inlet air pollution density and may vary from 7 up to 21 days. The filter cleaning interval is determined according to the results of the visual inspection of the filters. Vacuum cleaning is allowed.
Electrostatic filter enables purification of air from fine dust and soot, spray, smoke and other particles with the size of 0.01 microns and less. Maximum filter cleaning efficiency is 98 %. The electrostatic filters rely on gravity of oppositely charged particles. The polluted air stream flows through the spray charging unit for the particle ionization. As a result of the adsorption of the ions on the particle surface the ionized particles are moved by the air stream and accumulated on the collecting plates, which are oppositely charged.
APPLICATION OPTIONS

Modifications

Modification name

FB K2 100

FB K2 150 ES

FB K2 150

FB K2 200 ES

FB K2 200

FB K2 125

FB K2 100 ES

Capacity diagram

Selection method:
Air flow:
Pressure:

Operating point

Air flow: --
Pressure: ---

Downloads

Designation key

Series	Spigot diameter [mm]	Filters
FB K2	100; 125; 150; 200	G4/F8: G4 + F8 filters G4/С/F8: G4 + Carbon + F8 filters G4/H13: G4 + H13 filters G4/С/H13: G4 + Carbon + H13 filters ES: electrostatic filter

Accessories

Model	G4 replaceable panel filter	F8 replaceable panel filter	H13 replaceable panel filter	Replaceable carbon panel filter
FB К2 100	SF 220x400x47-G4	SF 220x400x47-F8	SF 220x400x47-H13	SF 220x400x47-C
FB K2 125	SF 220x400x47-G4	SF 220x400x47-F8	SF 220x400x47-H13	SF 220x400x47-C
FB К2 150	SF 270x425x47-G4	SF 270x425x47-F8	SF 270x425x47-H13	SF 270x425x47-C
FB К2 200	SF 270x590x47-G4	SF 270x590x47-F8	SF 270x590x47-H13	SF 270x590x47-C

* By default models with electrostatic filters ES are equipped with pre-filters G4. The G4 filter can be replaced by either F8, H13 or a carbon filter on request.

VENTS FB K2, FB K2 ES series