Ventilation for cafes & restaurants

Inline centrifugal fans in plastic casing with the air flow up to 1700 m³/h.

Inline mixed-flow fans with the air capacity up to 2050 m³/h.

Scroll-type single-inlet centrifugal fans powered by external rotor motor. Air flow up to 2000 m³/h.

One of the most efficient energy saving techniques. The destratificator is designed to prevent warm air accumulation in the building upper area and to direct warm air to the occupied area.

Inline centrifugal fans in steel casing with the air capacity up to 5260 m³/h.

Inline centrifugal fans in galvanized casing with the air capacity up to 1540 m³/h.

Inline centrifugal inline fans with the air capacity up to 1880 m³/h.

Exhaust centrifugal fans in steel casing with the air capacity up to 710 m³/h for outdoor surface mounting.

Centrifugal fans in the steel casing with the air capacity up to 553 m³/h for round ducts.

Compact centrifugal fans in steel casing with the air flow up to 783 m³/h with permanent air flow maintaining at alternating pressure in the system.

Scroll single-inlet centrifugal fans with the impeller mounted directly on the three phase asynchronous motor shaft. Air capacity up to 19 000 m³/h. The fan is designed for supply and exhaust ventilation systems.

Centrifugal roof fans with the air capacity up to 1880 m³/h in the steel casing with the horizontal exhaust of air.

Axial roof fans with the air capacity up to 2650 m³/h in the steel casing with the horizontal exhaust of air.

Axial roof fans with the air capacity up to 1700 m³/h in the steel casing with the horizontal exhaust of air.

Air handling units with the air flow up to 2200 m³/h and heat recovery efficiency up to 88 % in sound-proof and heat-insulated casing with electric heater

Air handling units with the air flow up to 2100 m³/h and heat recovery efficiency up to 78 % in sound-proof and heat-insulated casing with water heater

Multiple-inlet centrifugal fan in plastic casing with the air capacity up to 355 m³/h.

Air unit with the water heat exchanger for arrangement of cost-saving and efficient air heating and cooling in various premises.

The air curtains provide significant cost saving for the house cooling or heating due to invisible aerodynamic barrier between indoor and outdoor spaces, for instance, at the building entry.

Normally closed multiple-louvre fire safety dampers, fire resistance rating of 180 minutes at smoke temperature of 600 °C.

Normally open fire-resisting duct damper with mechanical drive mechanism.

Centrifugal ceiling fans with the air capacity up to 531 m³/h in steel casing with a plastic front panel.

Roof exhaust centrifugal fans with vertical air exhaust and the air flow up to 18270 m³/h.

Roof exhaust centrifugal fans with horizontal air exhaust and the air flow up to 18270 m³/h.

Air handling units in heat- and sound-insulated casing with an electric heater. Air flow up to 2250 m³/h. Heat recovery efficiency up to 95 %

Air handling units in heat- and sound-insulated casing with an electric heater. Air flow up to 2250 m³/h. Heat recovery efficiency up to 95 %

Inline centrifugal fans with the air flow up to 4790 m³/h in steel casing.

Heat recovery air handling units in sound- and heat-insulated casings. Air flow up to 830 m³/h. Heat recovery efficiency up to 98 %.

Air heating units with electric heaters for air heating of various premises

Roof-mounted centrifugal fan for smoke extraction with vertical air discharge.

Roof-mounted centrifugal fan for smoke extraction with horizontal air discharge.

Normally open fire-resisting duct damper with simplified design with electric drive mechanism.

Roof exhaust gas extraction booster fan for fireplaces. Air flow up to 1000 m³/h.

Normally closed single louvre fire safety dampers, fire resistance rating of 180 minutes at smoke temperature of 600 °C.

Normally open fire-resisting duct damper with electric drive mechanism.

Normally open fire-resisting duct damper with mechanical drive mechanism.

Normally open fire-resisting duct damper with electric drive mechanism.

Normally open fire-resisting duct damper with thermal fuse and return spring.

Normally open fire-resisting duct damper with electric actuator, return spring and thermoelectric breaker.

Inline mixed-flow fans with the air capacity up to 11100 m³/h.

Heater for heat exchanger freeze protection.

Inline centrifugal fans in plastic casing with the air capacity up to 1500 m³/h.

Medium pressure axial fans with air capacity up to 120 000 m³/h.

Duct heater for supply air post-heating with external control.

Inline mixed-flow fans with the air flow up to 1970 m³/h.

Inline mixed-flow fans with the air capacity up to 9450 m³/h.

Heat- and sound-insulated ventilation units with integrated electrostatic filters with air capacity up to 640 m³/h.

Air handling units in heat- and sound-insulated casing. Air flow up to 710 m³/h. Heat recovery efficiency up to 87 %

Centrifugal fans in sound-insulated casing with air flow up to 630 m³/h.

Air handling units in heat- and sound-insulated casing. Air flow up to 670 m³/h. Heat recovery efficiency up to 92 %