Equipment selection
- Selection method:
- Air flow:
- Pressure:
Operating point
- Air flow: --
- Pressure: ---
Print version
Search results
Mode | Power | Current | Voltage | Power consumption | Maximum air capacity | RPM | Sound pressure level at 3 m distance | Protection rating | Weight | A | Fan current | RPM | Noise level at 3 m | Maximum air flow capacity at cross directed | Maximal air flow capacity at straight directed | Spigot size | Phase | Number of poles | Frequency | Speed | Power | Air capacity | IP Code | Modification | Voltage | Maximum air capacity | RPM | Weight | Phase | Pressure | Frequency | Current | Sound pressure level at 3 m | Engine Type | SEC Class | Power | SEC Class | Motor protection rating | Duct diameter | EC motor | Width | Height | Casing material | Outdoor mounting | Sound-insulated casing | Duct | Design | Type | Mounting | Smoke removal | Maximum air capacity | Maximum air capacity | Current | Max. transported air temperature | Current | Sound pressure level at 3 m distance | Low-powered motor | Highpowered motor | PM 2.5 filtration efficiency | High-power version | Number of intake spigots | Sound- and heat-insulated casing | Low-powered motor | Casing height | Grille is available | External rotor | High powered external rotor motor | Two-speed with external rotor | Exhaust flange diameter | Intake flange diameter | Transported air temperature | Air capacity | Turbine protection rating | * | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
50 Hz | - | - | 1~ 220-240 | 85 | 553 | 2600 | 50 | IP X4 | 6.33 | - | - | - | - | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | B | - | - | - | 125 , 150 | - | - | - | polymer coated steel | - | - | for round air ducts | centrifugal | , | wall mounting , Inline | - | - | - | 0.38 | -25 +40 | - | - | - | - | - | - | 2 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
60 Hz | - | - | 1~ 220-240 | 107 | 610 | 2810 | 52 | IP X4 | 6,33 | - | - | - | - | - | - | - | - | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | B | - | - | - | 125 , 150 | - | - | - | polymer coated steel | - | - | for round air ducts | centrifugal | , | wall mounting , Inline | - | - | - | 0.47 | -25 +40 | - | - | - | - | - | - | 2 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | 230 | 730 | 7000 | 980 | 56 | IP X4 | 123 | - | - | - | - | - | - | - | 3 | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 500 | - | - | - | aluzinc | - | - | for round air ducts | centrifugal | supply and exhaust | Inline | - | - | - | 2.82 | -25...+55 | - | - | - | no | - | - | - | yes | no | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | 230 | - | 440 | 1250 | 27 | IP X4 | 15.92 | - | - | - | - | - | - | - | 1 | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | D | 107 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.49 | - | - | - | 39 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | 400 | 1150 | - | 830 | - | IP 24 | 33 | - | - | - | - | - | - | - | 3 | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 15440 | - | - | - | 2 | 63 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | 230 | - | 2915 | 930 | 48 | IP 54 | 87 | - | - | - | - | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 362 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.71 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | 230 | 113 | - | 1050 | 46 | IP X4 | - | - | - | - | - | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | 7.1 | - | - | - | - | - | - | C | - | - | - | 150 | - | - | - | polymer coated steel | - | - | for round air ducts | centrifugal | exhaust , supply | flush mounting , wall mounting , ceiling mounting | - | - | - | 0.52 | 50 | - | - | - | - | - | - | 1 | - | - | 207 | no | - | - | - | - | - | - | - | 536 | - | - |
- | - | - | - | - | - | - | - | IP X4 | - | - | - | - | - | - | - | - | - | - | - | - | 91 | 810 | - | - | 230 | - | 2470 | - | 1 | - | 50/60 | 0.69 | - | - | - | - | B | - | - | yes | - | - | galvanized steel | - | - | - | - | - | - | - | - | - | - | - | - | 33 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25 ... +50 | - | - | - |
- | 696 | - | - | - | - | - | - | - | - | 1.44 | - | 970 | 58 | - | - | - | - | 6 | - | - | - | - | IP X4 | - | 400 | - | - | 63 | 3 | - | 50 | - | - | - | - | - | - | IP54 | - | no | - | - | - | yes | no | - | centrifugal | exhaust | for roof | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 9630 | - | - |
min | - | 0.7 | - | 144 | - | - | - | IP X4 | - | - | - | - | - | - | - | - | 1 | - | - | min | - | 1007 | - | - | 230 | 1007 | 2292 | 9.5 | - | - | 50 | - | 38 | - | - | - | - | IP 20 | 250 | no | - | - | galvanized steel | no | yes | for round air ducts | mixed-flow | supply and exhaust | Inline | - | - | 280 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25 ... +55 | - | - | - |
mid | - | 0.81 | - | 173 | - | - | - | IP X4 | - | - | - | - | - | - | - | - | 1 | - | - | mid | - | 1404 | - | - | 230 | 1404 | 2626 | 9.5 | - | - | 50 | - | 43 | - | - | - | - | IP 20 | 250 | no | - | - | galvanized steel | no | yes | for round air ducts | mixed-flow | supply and exhaust | Inline | - | - | 390 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25 ... +55 | - | - | - |
max | - | 0.84 | - | 188 | - | - | - | IP X4 | - | - | - | - | - | - | - | - | 1 | - | - | max | - | 1670 | - | - | 230 | 1670 | 2876 | 9.5 | - | - | 50 | - | 45 | - | - | - | - | IP 20 | 250 | no | - | - | galvanized steel | no | yes | for round air ducts | mixed-flow | supply and exhaust | Inline | - | - | 464 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25 ... +55 | - | - | - |
- | 95 | - | - | - | - | - | - | - | - | - | 0.8 | 2478 | 47 | - | - | - | - | - | - | - | - | - | IP X4 | - | 230 | - | - | 7 | 1 | - | 50/60 | - | - | - | - | - | - | - | - | yes | - | - | aluminium | yes | no | - | centrifugal | exhaust | for roof | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25 ... +60 | 1350 | IP55 | - |
50 Hz | - | - | 400 | 145 | 2310 | 2350 | 52 | IP 24 | 5.1 | - | - | - | - | - | - | - | 3 | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.25 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
60 Hz | - | - | 400 | 165 | 2390 | 2570 | 52 | IP 24 | 5.1 | - | - | - | - | - | - | - | 3 | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.29 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
50 Hz | 141 | - | - | - | - | - | - | - | - | 0.64 | - | 1420 | 47 | - | - | - | - | 4 | - | - | - | - | IP X4 | - | 230 | - | - | 20 | 1 | - | 50 | - | - | - | - | - | - | IP54 | - | no | - | - | - | yes | no | - | centrifugal | exhaust | for roof | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25 ... +50 | 2265 | - | - |
60 Hz | 195 | - | - | - | - | - | - | - | - | 0.87 | - | 1740 | 49 | - | - | - | - | 4 | - | - | - | - | IP X4 | - | 230 | - | - | 20 | 1 | - | 60 | - | - | - | - | - | - | IP54 | - | no | - | - | - | yes | no | - | centrifugal | exhaust | for roof | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25 ... +50 | 2425 | - | - |
- | - | - | 230 | 41 | 420 | 1250 | 38 | IP X2 | 5.82 | - | - | - | - | - | - | - | 1 | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 140 | - | - | - | galvanized steel | - | - | for round air ducts | centrifugal | supply | for chimney | - | - | - | 0.14 | 150 | - | - | - | - | - | - | - | yes | - | - | - | yes | no | no | - | - | - | - | - | - | - |
- | - | - | 230 | 44 | 470 | 1110 | 39 | IP X2 | 10.8 | - | - | - | - | - | - | - | 1 | - | 50 | - | - | - | - | KFK+GFK | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 160 | - | - | - | galvanized steel | - | - | for round air ducts | centrifugal | supply | for chimney | - | - | - | 0.19 | 150 | - | - | - | - | - | - | - | yes | - | - | - | yes | no | no | - | - | - | - | - | - | - |
50 Hz | - | 0.76 | - | - | - | - | 48 | IP X4 | - | - | - | - | - | - | - | - | - | - | - | - | 173 | - | - | - | 230 | 930 | 2125 | 4.3 | 1 | - | 50 | - | - | - | - | - | B | - | 200 | no | 354 | 340 | plastic | no | no | for round air ducts | centrifugal | exhaust , supply | Inline | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). |
60 Hz | - | 0.94 | - | - | - | - | 49 | IP X4 | - | - | - | - | - | - | - | - | - | - | - | - | 216 | - | - | - | 230 | 1020 | 2155 | 4.3 | 1 | - | 60 | - | - | - | - | - | - | - | 200 | no | 354 | 340 | plastic | no | no | for round air ducts | centrifugal | exhaust , supply | Inline | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). |
- | - | - | 230 | 130 | 836 | 1450 | 68 | IP X4 | 8.25 | - | - | - | - | - | - | 80 , 200 | 1 | 4 | 60 | - | - | - | - | - | - | - | - | - | - | 343.8 | - | - | - | 220V / 60Hz | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | 230 | 617 | 2470 | 1465 | 46 | IP X4 | 31.3 | - | - | - | - | - | - | - | 1 | 4 | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | galvanized steel | - | - | for round air ducts | centrifugal | supply and exhaust | Inline | - | - | - | 2.69 | -20 +50 | - | - | - | yes | - | - | 1 | yes | - | - | - | - | - | - | - | 250 | 250 | - | - | - | - |
- | - | - | 230 | - | 3400 | 1500 | 51 | IP 54 | 40 | - | - | - | - | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1500 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 11 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | 380-480 | 1320 | - | - | 45 | IP X4 | 50 | - | - | 1350 | - | 10450 | 9928 | - | 3 | - | 50/60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 500 | yes | - | - | aluzinc , aluminium | - | - | for square air ducts , for round air ducts | centrifugal | supply and exhaust | Inline | - | - | - | 2.1 | -25 +50 | - | - | - | no | - | - | - | yes | - | - | - | - | - | - | - | - | - | - | - | - | - |
50 Hz | - | - | 220-240 | 665 | 5300 | 1265 | 65 | IP X4 | 27.26 | - | - | - | - | - | - | - | - | - | 50 | - | - | - | - | - | - | - | - | - | 1 | - | - | - | - | - | - | - | - | - | 450 | - | - | - | polymer coated steel | - | - | for round air ducts | centrifugal | supply and exhaust | Inline | - | - | - | 2.89 | -40 +70 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). |
60 Hz | - | - | 220-240 | 1250 | 6280 | 1560 | 73 | IP X4 | 27.26 | - | - | - | - | - | - | - | - | - | 60 | - | - | - | - | - | - | - | - | - | 1 | - | - | - | - | - | - | - | - | - | 450 | - | - | - | polymer coated steel | - | - | for round air ducts | centrifugal | supply and exhaust | Inline | - | - | - | 5.4 | -25 +60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). |
- | - | - | 400 | 2000 | - | 680 | 59 | IP X4 | 95 | - | - | - | - | - | - | - | 3 | 8 | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1000 | 500 | galvanized steel | - | - | for rectangular air ducts | centrifugal | - | Inline | - | - | - | 4.1 | - | - | - | - | - | - | - | - | no | - | - | - | - | - | - | - | - | - | -20 … +40 | 7175 | - | - |
- | - | - | 1~230 | 82 | 630 | 3400 | 45 | IP X4 | 2.5 | - | - | - | - | - | - | - | - | - | 50/60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | B | - | - | - | 150 | yes | - | - | plastic | - | - | for round air ducts | centrifugal | - | Inline | - | - | - | 0.63 | -25 +60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | To meet the requirements of ErP 2018, a speed controller and local demand control typology must be applied (connect a sensor). |
- | - | - | 3~400 | 1350 | 9450 | 1320 | 68 | IP X4 | - | - | - | - | - | - | - | - | 3 | 4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 500 | - | - | - | polymer coated steel | - | - | - | - | Inline | - | - | - | 2.3 | -25 +60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
- | - | - | 230 | 100 | - | 2500 | 44 | IP X4 | 5.1 | - | - | - | - | - | - | - | 1 | - | 50/60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | B | - | - | - | 250 | yes | - | - | polymer coated steel | yes | - | for round air ducts | centrifugal | supply and exhaust | outdoor mounting , Inline | - | - | - | 0.74 | -25 +60 | - | - | yes | - | - | no | - | - | - | - | - | - | - | - | - | - | - | - | 985 | - | - |
50 Hz | - | - | 400 | 550 | 10950 | 900 | 59 | IP X4 | 16.4 | - | - | - | - | - | - | - | 3 | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.45 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
60 Hz | - | - | 400 | 716 | 11120 | 1060 | 59 | IP X4 | 16.4 | - | - | - | - | - | - | - | 3 | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.56 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
TO COMPLETE THE REGISTRATION CLICK ON THE LINK SENT YOU BY EMAIL
x
Your registration has been successfully completed. Enter your details in the login form in the Personal Area.
x
Your message
was successfully sent x
was successfully sent x
Check your inbox for further instructions
x
Share your opinion
Questionnaire
Is our site helpful for your business development?