Domestic fans 
Industrial and commercial fans 
Single-room ventilation systems with heat recovery 
Air handling units 
Air heating systems 
Air sterilizers 
Smoke extraction and ventilation 
Accessories for ventilating systems 
Electrical accessories 
Ventilation ducts and fittings 
Air distribution components 
Ventilation kits and vents VENTS 120 X1VT
- Characteristics
- Capacity diagram
- Downloads
- Options
- Dimensions
Characteristics
Characteristics
| Parameter | Value | Measurement unit |
|---|---|---|
| Voltage | 220-240 | V |
| Frequency | 50 | Hz |
| Power consumption | 17 | W |
| Air capacity | 179 | m³/h |
| Current | 0.1 | A |
| RPM | 2400 | min-1 |
| Sound pressure level at 3 m | 35 | dBА |
| Weight | 0.73 | kg |
| Spigot size | 120 | mm |
| Engine Type | 220-240V / 50Hz | - |
| Design | axial | - |
| Duct diameter | 120 | mm |
| IP Code | IP 24 | - |
| Type | exhaust | - |
| Mounting | wall mounting , ceiling mounting | - |
Capacity diagram
Capacity diagram
- Selection method:
- Air flow:
- Pressure:
Operating point
- Air flow: --
- Pressure: ---
Files archieve
Downloads
Modifications
Modifications
| Modification name | Timer | Pull-cord switch | |
|---|---|---|---|
| VENTS 120 X1VT |
|
|
|
Dimensions
Characteristics
| Parameter | Value | Measurement unit |
|---|---|---|
| Ø D | 120 | mm |
| B | 177 | mm |
| H | 140 | mm |
| L | 95 | mm |
| L1 | 13 | mm |
Designation key
Designation key
| PICTURE SYMBOL | DESIGNATION | MODIFICATION DESCRIPTION |
 |
X1 K | Fan is equipped with a backdraft damper for back flow preventing. |
 |
X1 L | The motor is equipped with ball bearings for long service life (appr. 40 thousand hours) and fan mounting at any angle. The bearings are maintenance-free and contain enough grease for the entire operating period. |
 |
X1 turbo | High-powered motor. |
 |
Х1 12 | Modification with low-voltage motor. 12 V AC power supply. |
 |
X1 T | Equipped with a regulated timer with the operating time from 2 to 30 minutes. |
 |
X1 TH | Equipped with a timer with the operating time from 2 to 30 minutes and a humidity sensor with the threshold value from 60 to 90 %. |
 |
X1 V | Equipped with a pull cord switch. |
|
X1 VT | Equipped with a pull cord switch and a regulated timer with the operating time adjustable from 2 to 30 minutes. |
|
X1 VTH | Equipped with a pull cord switch, regulated timer with the operating time adjustable from 2 to 30 minutes and a humidity sensor with the operating threshold range from 60 to 90 %. |
AccessoriesSimilar products
