Domestic fans 
Industrial and commercial fans 
Single-room ventilation systems with heat recovery 
Air handling units 
Air heating systems 
Air sterilizers 
Smoke extraction and ventilation 
Accessories for ventilating systems 
Electrical accessories 
Ventilation ducts and fittings 
Air distribution components 
Ventilation kits and vents VENTS 150 M press (220-240V/60Hz)
- Characteristics
- Downloads
- Options
- Dimensions
Characteristics
Characteristics
| Parameter | Value | Measurement unit |
|---|---|---|
| Voltage | 220-240 | V |
| Frequency | 60 | Hz |
| Power consumption | 29 | W |
| Air capacity | 307 | m³/h |
| RPM | 2400 | min-1 |
| Current | 0.13 | A |
| Sound pressure level at 3 m | 41 | dBА |
| Spigot size | 150 | mm |
| Design | axial | - |
| Duct diameter | 150 | mm |
| IP Code | IP 34 | - |
| Type | exhaust | - |
| Mounting | wall mounting , ceiling mounting | - |
Files archieve
Downloads
Modifications
Modifications
| Modification name | 5-blade low-noise impeller | |
|---|---|---|
| VENTS 150 M press (220-240V/60Hz) |
|
|
Dimensions
Characteristics
| Parameter | Value | Measurement unit |
|---|---|---|
| Ø D | 125 | mm |
| B | 180 | mm |
| H | 150 | mm |
| L | 94 | mm |
| L1 | 25 | mm |
Legend
Legend
| PICTURE SYMBOL | DESIGNATION | MODIFICATION DESCRIPTION |
 |
M К | Fan is equipped with a backdraft damper for back flow preventing. |
 |
M L | The motor is equipped with ball bearings for long service life (appr. 40 thousand hours) and fan mounting at any angle. The bearings are maintenance-free and contain enough grease for the entire operating period. |
 |
М turbo | High-powered motor. |
 |
M press | 5-blade low-noise impeller with improved aerodynamics for higher fan capacity. |
 |
М 12 | Modification with low-voltage motor. 12 V AC power supply. |
 |
MT | Equipped with a regulated timer with the operating time from 2 to 30 minutes. |
 |
MTH | Equipped with a timer with the operating time from 2 to 30 minutes and a humidity sensor with the threshold value from 60 to 90%. |
 |
MV | Equipped with a pull cord switch. |
|
МVТ | Equipped with a pull cord switch and a regulated timer with the operating time adjustable from 2 to 30 minutes. |
 |
MVТН | Equipped with a pull cord switch, regulated timer with the operating time adjustable from 2 to 30 minutes and a humidity sensor with the operating threshold range from 60% to 90%. |
 |
МТР | Equipped with a regulated timer and a motion sensor with the sensitivity area from 1 to 4 m and the detection angle up to 100°). |
Example of installation
Example of installation
Accessories
